Manufacturers, however, hold a different understanding, founded upon existing FDA definitions (see below)....
Search Results "BHMA: Builders Hardware Manufacturers Association"
Filters
Commonly Searched Documents
-
7.1 Basic Understanding of Diagnostic Imaging Equipment
-
Preliminary Guidelines for SEWF Installation
Follow manufacturer's instructions for storage and handling of the binder. Binder materials must be stored indoors in cool dry storage out of sunlight....
-
Findings
Occurrences were identified in the sample where the surface material installation did not parallel either the manufacturer’s installation instructions or the procedural instructions on the...
-
2.3 Infrared (IR) Systems
The specific bandwidth of the IR carrier varies among manufacturers; it may be as narrow as 50 nm wide, or considerably broader and perhaps be visible as a faint reddish glow (Laszlo l998...
-
Storefront Improvement Program (SIP) - City of Cambridge, Massachusetts
This program provides: 90% matching grant up to $20,000 for ADA improvements to entrance, including ramps, lifts, doors hardware and automatic openers, accessible parking, and signage...
-
Kitchen Appliances
Appliance manufacturers called attention to various appliances that cannot be easily redesigned to meet the maximum 5 pounds of force....
-
Multiple Chemical Sensitivities and Electromagnetic Sensitivities
In this project, the Board is bringing together building owners, architects, building product manufacturers, model code and standard-setting organizations, individuals with multiple chemical...
-
Accessible Counter Height
Comments from the retail industry advised that a higher surface height is needed to accommodate various types of counters, such as glass display cases, which are typically manufactured at...
-
Issue 5: Tactile arrow (in line)
Figure 14: Braille sign installed backwards, with manufacturers’ label showing. Label includes street name and print of how Braille should look....
-
4. ABSOLUTE DIMENSIONS
lack of care and coordination exercised in the planned placement of the wall, the rough plumbing, and the wall finish was the cause of the deviation, rather than any field condition or manufacturing...
-
2. Armrests Requirement
The only commenter that addressed whether armrests should be required was a manufacturer who requested that beds, cots, and stretchers be excluded from the requirements as they are required...
-
M301.4 Lift Compatibility (Section-by-Section Analysis)
One manufacturer commented on this provision, asserting that the proposed requirement was unclear and should clearly state that the diagnostic equipment only has to be compatible with either...
-
8.3 Alternate Means of Access
Although current technical requirements may prevent compliance with recommended access standards (see Section 7 for examples), Committee members aimed to encourage manufacturers and developers...
-
Conclusions
The results of these studies could help airline, motor vehicle, amusement park ride, and adaptive equipment manufacturers to improve and create designs that facilitate the transfer process...
-
T303 Handrails, Stanchions, and Handholds
A seating manufacturer expressed concern that larger diameter handholds would result in significant industry-wide expense and lead to potential safety issues because greater rigidity would...
-
Positioning Supports Considered
b) What would be the incremental costs for the design or redesign and manufacture of positioning supports?...
-
Other relevant federal rules and guidance documents
The FDA-CDRH may develop a guidance document to inform manufacturers how it intends to apply its regulatory authority to clearance or approval of medical devices addressed in the Access...
-
National Amputation Foundation
This has proven to be a real morale builder. We have a list of support groups for every state and we offer booklets and pamphlets of special interest to the amputee....
-
Deltrex T106 Series Push Plate Switch
A full list of customizable options are available Features All manufactured with rust resistant 1/4" inch aluminum Non-binding internal stainless steel screws Tested for 1,000,000,000...
-
Site Profiles by Surface Type
Thus, requests for assistance identifying Midwest sites were made to the three major shredded rubber manufacturers and the international member association. ...
-
7. Commit to Ongoing Maintenance of Accessible Playground Surfaces as a Responsibility of Ownership
The NCA surface study showed there was a lack of installation/maintenance information provided by the manufacturer to the playground owner prior to purchase and there was a steep learning...
-
Inpro Corporation IPC® 900 Handrail
chemical emissions levels Meets ADA and ANSI criteria Approved in California by OSHPD for hospital use Available in our G2 BioBlend® material Non-PVC cover is manufactured...
-
Battery-powered Wheelchairs
If (i) the battery on the passenger’s wheelchair has been labeled by the manufacturer as non-spillable or (ii) the battery-powered wheelchair with a spillable battery can be loaded, stored...
-
Running Slope of Ramps Deployed to Roadways or Curb-Height Bus Stops
Second, low floor bus technologies had rapidly evolved and all major domestic bus manufacturers offered one or more models....
