Occurrences were identified in the sample where the surface material installation did not parallel either the manufacturer’s installation instructions or the procedural instructions on the...
Search Results "BHMA: Builders Hardware Manufacturers Association"
-
Findings
-
2.3 Infrared (IR) Systems
The specific bandwidth of the IR carrier varies among manufacturers; it may be as narrow as 50 nm wide, or considerably broader and perhaps be visible as a faint reddish glow (Laszlo l998...
-
Deltrex D106 Series Push Plate Switch
A full list of customizable options are available Features All manufactured with rust resistant 1/4" inch aluminum Non-binding internal stainless steel screws Tested for 1,000,000,000...
-
Deltrex F106 Series Push Plate Switch
Features All manufactured with rust resistant 1/4" inch aluminum Non-binding internal stainless steel screws Tested for 1,000,000,000 pushes...
-
Irwin Seating Company ADA Swing-Away Aisle Panels
Many aisle end panels can be manufactured to swing open to allow an individual to transfer between a wheelchair and the theatre chair....
-
Running Slope of Ramps Deployed to Roadways or Curb-Height Bus Stops
Second, low floor bus technologies had rapidly evolved and all major domestic bus manufacturers offered one or more models....
-
Evaluating the Accessibility of a Meeting Site
To access the legal minimum standards associated with each feature, see the ADA Standards for Accessible Design (http://www.ada.gov/stdspdf.htm) The Standards are also available on the U.S...
-
Water Closet Clear Floor Space
The proposed rule identified certain elements that could overlap the clear floor space at water closets: associated grab bars, tissue dispensers, accessible routes, clear floor space at...
-
Updates and Other Pocket Guides
Evan Terry Associates will continue to revise and update this Pocket Guide as new technical assistance is released and interpretations are provided by federal agencies....
-
Ground Surfaces
Department would caution covered entities selecting among the ground surfacing materials that comply with the ASTM requirements that they must anticipate the maintenance costs that will be associated...
-
221.2.2 Integration
For example, it would be unacceptable to place only the wheelchair spaces, or only the wheelchair spaces and their associated companion seats, outside the seating areas defined by risers...
-
Q5.) What dimensions and conditions can practitioners reasonably consider to be compliant when the conditions, as constructed, do not meet the technical requirements exactly and there are no official, published, industry-developed tolerances?
To our knowledge, none of the industry associations have developed official tolerances for sloped concrete or asphalt surfaces except those laid down by large paving machines. ...
-
ABBREVIATIONS
especially Section 504) UFAS Uniform Federal Accessibility Standards - 1988 __________________________________________________________________________________________ Evan Terry Associates...
-
407.3.2 Alphabetic Keys (Section-by-Section Analysis)
Accordingly, there should be no additional cost associated with this provision....
-
Audio Visual Components
assistive listening systems or devices available, how the meeting room is wired and equipped for sound amplification, and if there are additional costs for accessibility equipment and associated...
-
FAQ: Why was Corada created?
Evan Terry Associates created Corada for the purpose of helping people to identify, to understand, and to meet their obligations under the ADA and other access requirements and to help...
-
Purpose of the project
The Access Board contracted with David Ballast, FAIA, CSI with Architectural Research Consulting to manage the project and provide assistance and advice to industry associations as required...
-
G. ANSI/AAMI HE 75
In 2009, the Association for the Advancement of Medical Instrumentation issued ANSI/AAMI HE 75, a recommended practice on human factors design principles for medical devices....
-
A. Movie Basics, Captioning, and Audio Description Generally
Testimony of John Fithian, President and CEO of the National Association of Theater Owners, Before the U.S....
-
Battery-powered Wheelchairs
If (i) the battery on the passenger’s wheelchair has been labeled by the manufacturer as non-spillable or (ii) the battery-powered wheelchair with a spillable battery can be loaded, stored...
-
Site Profiles by Surface Type
Thus, requests for assistance identifying Midwest sites were made to the three major shredded rubber manufacturers and the international member association. ...
-
7. Commit to Ongoing Maintenance of Accessible Playground Surfaces as a Responsibility of Ownership
The NCA surface study showed there was a lack of installation/maintenance information provided by the manufacturer to the playground owner prior to purchase and there was a steep learning...
-
M301.3.1 Transfer Supports
These requirements are already addressed by international standards that medical device manufacturers need to follow (e.g. risk management (ISO 14971); IEC60601-1; and use of IEC60601-2-...
-
Implications
Proper installation in accordance to the manufacturer’s instructions, per the standards, and by experienced personnel is critical. ...
