The distance between the grab bar and wall is an exact dimension. Many disabled people rely heavily upon grab bars to maintain balance and prevent serious falls....
Search Results "Maximum Dimension"
Filters
Commonly Searched Documents
-
11B-609.3 Spacing
-
1008.2.5.3.1 Handrail Gripping Surfaces
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum....
-
A1
Is a relatively level (1:50 or 2% maximum slope in all directions) access aisle provided adjacent and parallel to the side of the vehicle pull-up area?...
-
1009.2.4 Seat Height
The height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the...
-
R409.4 Height
Top of gripping surfaces of handrails shall be 865 mm (2.8 ft) minimum and 965 mm (3.2 ft) maximum vertically above walking surfaces, ramp surfaces, and stair nosings....
-
Forward Approach
Forward Approach A maximum height of 48 inches is required for a forward reach....
-
4.24.5 Clear Floor Space
The clear floor space shall be on an accessible route and shall extend a maximum of 19 in (485 mm) underneath the sink (see Fig. 32)....
-
4.24.5 CLEAR FLOOR SPACE
The clear floor space shall be on an accessible route and shall extend a maximum of 19 in (485 mm) underneath the sink (see Fig. 32)....
-
§ 37.197(b)
subpart requires an entity purchasing or leasing a new OTRB to purchase or lease an accessible OTRB, OTRBs acquired through the actions listed in paragraph (a) of this section shall, to the maximum...
-
EQUIVALENT FACILITATION
Note: In determining equivalent facilitation, consideration shall be given to means that provide for the maximum independence of persons with disabilities while presenting the least risk...
-
Geberit Monolith Floor Mounted Toilet with White Glass
Features - Complete system for replacing a floor-mounted toilet - Fits new or existing rough-in dimensions from 9" to 12" - Elongated bowl fits in the space of a round bowl - Dual-flush...
-
Bridge II Sconce by Hampstead
Bow shaped Grooved Stainless Steel sconce and White Glass Dimensions: H:3.25" L:21.75" E:3.75" Diffuser: White Glass Finish: Stainless Steel Certification: cUL Options:...
-
Bridge I Sconce by Hampstead
Bow shaped Grooved Stainless Steel sconce and White Glass Dimensions: H:3.25" L:15.75" E:3.75" Diffuser: White Glass Finish: Stainless Steel Certification: cUL Options:...
-
11B-1008.4.4 Entry points and seats
Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (279 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground...
-
504.2 Treads and Risers
Risers shall be 4 inches (100 mm) high minimum and 7 inches (180 mm) high maximum. Treads shall be 11 inches (280 mm) deep minimum. [ECTCR UFAS 4.9.2]...
-
§382.133(e)(4)
(4) Any requirement, if applicable, that an individual contact the carrier operating the flight 48 hours before scheduled departure to learn the expected maximum duration of his/her flight...
-
§382.133(f)(5)
(5) Any requirement, if applicable, that an individual contact the carrier operating the flight 48 hours before scheduled departure to learn the expected maximum duration of his/her flight...
-
904.4.2 Forward Approach
A portion of the counter surface that is 30 inches (760 mm) long minimum and 36 inches (915 mm) high maximum shall be provided....
-
904.4.2 Forward Approach
A portion of the counter surface that is 30 inches (760 mm) long minimum and 36 inches (915 mm) high maximum shall be provided....
-
Large transit entity
required to report to the National Transportation Database (49 U.S.C. 5335), and that, for an any given calendar year, reports to such database the operation of 100 or more buses in annual maximum...
-
NEW CONSTRUCTION AND ALTERATIONS {35.151}
and constructed to be readily accessible to and usable by individuals with disabilities when bids are invited after 1-26-92 Alterations Shall be altered to the maximum...
-
504.2 Treads and Risers
Risers shall be 4 inches (100 mm) high minimum and 7 inches (180 mm) high maximum. Treads shall be 11 inches (280 mm) deep minimum....
-
§104.34(b) Nonacademic settings
the services and activities set forth in §104.37(a)(2), a recipient shall ensure that handicapped persons participate with nonhandicapped persons in such activities and services to the maximum...
-
11B-703.5.8 Character spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height. [S.H. ...
