In our opinion, the plain language of the term “Construction and Manufacturing Tolerances” does not include adjustable conditions that can meet the detailed requirements when properly maintained...
Search Results "CSI: Construction Specification Institute"
-
Q4.) Are conditions like door closers that require force in excess of the maximum allowed by the standards considered true tolerances or are they simply non-compliance with the maintenance requirements of 35.133 or 36.211?
-
§ 36.304(d)(4)(iii)
(iii) Where an existing sauna or steam room was designed and constructed to seat only two people, it shall be exempt from the provisions of section 241 of the proposed standards....
-
§8.22(a)
(a) New multifamily housing projects (including public housing and Indian housing projects as required by §8.25) shall be designed and constructed to be readily accessible to and usable...
-
Existing facility
Existing facility means a facility in existence on any given date, without regard to whether the facility may also be considered newly constructed or altered under this part....
-
10.3.1(10)
(10) Stations shall not be designed or constructed so as to require persons with disabilities to board or alight from a vehicle at a location other than one used by the general public....
-
Existing facility
Existing facility means a facility in existence on any given date, without regard to whether the facility may also be considered newly constructed or altered under this part....
-
11B-238.2.3 Weather shelters
Where provided, weather shelters shall be designed and constructed so that a golf car can enter and exit the weather shelter and shall comply with Section 11B-1006.4. ...
-
1.9.1.1.1
1.9.1.1.1 All buildings, structures, sidewalks, curbs and related facilities constructed in the state by the use of state, county or municipal funds, or the funds of any political subdivision...
-
11B-238.2.3 Weather shelters
Where provided, weather shelters shall be designed and constructed so that a golf car can enter and exit the weather shelter and shall comply with Section 11B-1006.4....
-
Sec. 469.152. Waiver or Modification Prohibited.
The commission may not waive or modify a standard or specification if:...
-
Sec. 469.057(b)(2)
(2) the procedures for submitting plans and specifications for review;...
-
Sec. 469.054(c)(1)
(1) the review of the plans or specifications of a building or facility;...
-
SHALL
[DSA-AC] Denotes a mandatory specification or requirement....
-
§ 38.4(d)(4)
(4) Shall denotes a mandatory specification or requirement....
-
§ 38.4(d)(5)
(5) Should denotes an advisory specification or recommendation....
-
SHALL
[DSA-AC] Denotes a mandatory specification or requirement....
-
Valuta Waste Receptacles
Constructed of steel, VALUTA offers 4 sized bodies -- 40, 35, 20 and 14-gallon units - each with 4 top options for easy sorting of waste, paper, cans and bottles....
-
Substantive changes made to requirements for elevators
Substantive changes made to requirements for elevators in section 407 include: revision of the height of call controls (407.2.1.1) removal of a specification concerning...
-
The Guidelines are not mandatory
The design specifications presented in the Fair Housing Accessibility Guidelines provide technical guidance to builders and developers in complying with the specific accessibility requirements...
-
Accessible Jury Boxes, Attorney Areas, and Witness Stands
Section 206.2.4 of the 2010 Standards requires, in new construction and alterations, at least one accessible route to connect accessible building or facility entrances with all accessible...
-
Resting Intervals [1018.8]
When the surface of the resting interval is constructed of asphalt, concrete, or boards, the slope of the resting interval must be no steeper than 1:48 (2 percent) in any direction....
-
1017.9 Protruding Objects
This section requires constructed elements on trails, resting intervals, and passing spaces to comply with the technical requirements for protruding objects in 307 of the Architectural Barriers...
-
Routes and Destinations: ADA Standard Section 810.6.2
At least one tactile sign identifying the specific station and complying with 703.2 shall be provided on each platform or boarding area....
-
§382.19(d)
This statement must include the specific basis for the carrier's opinion that the refusal meets the standards of paragraph (c) of this section or is otherwise specifically permitted by this...
