Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
Search Results "Mobility Feature"
Filters
Commonly Searched Documents
-
1002.5.3 Transfer Entry
-
Entrance [1014.2]
Providing shelters with roll-in access enables people using mobility devices to also shelter the device....
-
12207(c)(2) "Wheelchair" defined
(2) "Wheelchair" defined For purposes of paragraph (1), the term "wheelchair" means a device designed solely for use by a mobility-impaired person for locomotion, that is suitable for...
-
§ 38.159(c)(4) Ramp barriers
Each side of the ramp shall have barriers at least 2 inches (50 mm) high to prevent mobility aid wheels from slipping off....
-
§ 38.95(c)(4) Ramp barriers
Each side of the ramp or bridge plate shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off....
-
§ 38.125(c)(4) Ramp barriers
Each side of the ramp or bridge plate shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off....
-
§ 38.83(c)(4) Ramp barriers
Each side of the ramp or bridge plate shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off....
-
Aircraft Accessibility
When considering ordering, purchasing, or leasing aircraft, management of carriers should keep in mind that the following features are required for aircraft ordered by the carrier after...
-
Side Entry: ADA Standard Section 1002.4.4.2
Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to...
-
11B-1002.4.4.2 Side entry
Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to...
-
II-6.2100 General.
If no standard exists for particular features, those features need not comply with a particular design standard....
-
4.4.3 Implications of Mammography Equipment Components
Another important feature of mammography equipment is the base support (shown in Figure 4.4.3(a), which is critical for structural support, seismic stability, and installation safety....
-
Background (SBREFA, Regulatory Flexibility Act, and Executive Order) Reviews
possibility that, as a result of the receipt of comments on an issue raised by the 2004 ADAAG, or if the Department's Regulatory Impact Analysis reveals that the costs of making a particular feature...
-
Background (SBREFA, Regulatory Flexibility Act, and Executive Order) Reviews
possibility that, as a result of the receipt of comments on an issue raised by the 2004 ADAAG, or if the Department's Regulatory Impact Analysis reveals that the costs of making a particular feature...
-
Museum Investments in Access
The key to protecting these investments is maintaining the accessibility that has been put into place -- both the general features of a public accommodation and features and programs that...
-
Evaluating the Physical Accessibility of Polling Places
The following checklist is designed to help voting officials determine whether a polling place has basic accessible features needed by most voters with disabilities....
-
American Standard Brandon Centerset Bathroom Faucet
The Brandon centerset bathroom faucet from American Standard features a stylish, clean design with gentle curves and a mid-height arc that allows extra room for hand washing....
-
A.2.ii. - Should EIT be compatible with assistive technology?
For example, products covered by Section 1194.25, Self Contained, Closed Products, must have the access features built into the product....
-
11B-407.4.4 Leveling
Each car shall be equipped with a self-leveling feature that will automatically bring and maintain the car at floor landings within a tolerance of ½ inch (12.7 mm) under rated loading to...
-
407.4.4 Leveling
Each car shall be equipped with a self-leveling feature that will automatically bring and maintain the car at floor landings within a tolerance of ½ inch (13 mm) under rated loading to zero...
-
Camp Living Area
The area in a camping unit that contains constructed features, such as picnic tables, grills, fire rings, utilities, and other related elements, and may be located adjacent to or near a...
-
Outdoor Recreation Access Route (ORAR)
A continuous, unobstructed path designed for pedestrian use that connects constructed features in a campground, camping unit, picnic area, at a trailhead or other recreation site where modifications...
-
11B-407.4.4 Leveling
Each car shall be equipped with a self-leveling feature that will automatically bring and maintain the car at floor landings within a tolerance of ½ inch (12.7 mm) under rated loading to...
-
11B-407.4.4 Leveling
Each car shall be equipped with a self-leveling feature that will automatically bring and maintain the car at floor landings within a tolerance of ½ inch (12.7 mm) under rated loading to...
