Vertical lifts are intended for people who use wheelchairs although others may be able to use them under the ASME code if a seat is provided....
Search Results "Folding Shower Seat"
-
Vertical Wheelchair Lifts
-
4. Seating Plans for Designed Theaters and Future Construction Theaters
Seating Plans for Designed Theaters and Future Construction Theaters The United States has reviewed and specifically approves the auditoria seating plans for the Designed Theaters set...
-
II. ENFORCING THE ADA PART 2
of the agreement, Washington Hospital Center agreed to: create a minimum of 35 fully accessible patient rooms, with each including an accessible toilet room and an accessible shower...
-
Dispersion of Wheelchair Seating Areas (Section-By-Section Analysis and Response to Comments)
- Dispersal of wheelchair seating areas in theaters will be required only where there are more than 300 seats, rather than in all cases....
-
Does a wheelchair user have to use the seat belt and shoulder harness?
Transit operators may establish a policy that requires the seat belt and shoulder harness to be used by all riders, including those who use wheelchairs as well as those who use vehicle seats...
-
§ 35.138(h) Prevention of fraud in purchase of tickets for accessible seating
(h) Prevention of fraud in purchase of tickets for accessible seating....
-
§ 37.91(b)(2)
(2) To fold and store wheelchairs (to accommodate individuals who wish to transfer to coach seats) equal to not less than the total number of single level rail passenger coaches in the train...
-
Does a wheelchair user have to use the seat belt and shoulder harness?
Transit operators may establish a policy that requires the seat belt and shoulder harness to be used by all riders, including those who use wheelchairs as well as those who use vehicle seats...
-
§100.205(c)(3)(iii)
(iii) Reinforcements in bathroom walls to allow later installation of grab bars around the toilet, tub, shower, stall and shower seat, where such facilities are provided; and...
-
AJW Architectural Products U2304 Unidoor C-fold/Multifold Towel Dispenser - Recessed
Product Features Fabricated of #22 gauge stainless steel with a #4 satin finish Holds 600 c-fold or 800 multifold towels Unit features Uni-door construction Product Specs...
-
AJW Architectural Products U2314 Unidoor C-fold/Multifold Towel Dispenser - Recessed
Product Features Fabricated of #22 gauge stainless steel with a #4 satin finish Holds 600 c-fold or 800 multifold towels Unit features Uni-door construction Product Specs...
-
AJW Architectural Products U2324 Unidoor C-fold/Multifold Towel Dispenser - Recessed
Product Features Fabricated of #22 gauge stainless steel with a #4 satin finish Holds 350 c-fold or 475 multifold towels Unit features Uni-door construction Product Specs...
-
Wheelchair seating locations must be provided in all areas
• Wheelchair seating locations must be provided in all areas including sky boxes and specialty areas....
-
§ 37.91(a)(2)
(2) To fold and store wheelchairs (to accommodate individuals who wish to transfer to coach seats) equal to not less than one half the number of single level rail passenger coaches in the...
-
§ 35.138(h) Prevention of fraudulent purchase of accessible seating
(h) Prevention of fraudulent purchase of accessible seating. A public entity may not require proof of disability before selling a wheelchair space....
-
M305.2.2.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M305.2.2.1 shall be 15 inches (380 mm) long minimum. Transfer supports shall be positioned along 13 ½ inches...
-
M305.2.4.1 Circular Cross Section
Transfer supports with circular cross sections shall have an outside diameter of 1 ¼ inches (32 mm) minimum and 2 inches (51 mm) maximum.
-
M305.2.1.2 Side Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.2 shall be capable of supporting transfer on each side of the transfer surface.
-
M305.2.1.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M302.2 shall be located on the short side (length) opposite the transfer side.
-
M305.2.2.2 Side Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.2 shall be 28 inches (710 mm) long minimum and shall be positioned along the width of transfer...
-
AJW Architectural Products U230 Series C-fold/Multifold Towel Dispenser - Recessed
Product Features Fabricated of #22 gauge stainless steel with a #4 satin finish Holds 600 c-fold or 800 multifold towels Secured with pin tumbler lock, keyed like all AJW cabinets...
-
Attachment I: Program Access in Existing Facilities
Attachment I: Program Access in Existing Facilities
-
§ 38.123(a)(1)
Fold-down or retractable seats or shelves may overlap the clear floor space at a lower height provided they can be easily folded up or moved out of the way....
-
M305.2.4.2 Non-Circular Cross Section
Transfer supports with non-circular cross sections shall have a cross-section dimension of 2 inches (51 mm) maximum and a perimeter dimension of 4 inches (100 mm) minimum and 4.8...
