Search Results "Clearance Around Base"

• Drawings and Possible Solutions > CAD/BIM Details
  Figure 404.2.4.3(b) Maneuvering Clearance at Recessed Doors and Gates – Drawing from the U.S. Access Board
  

• Federal Documents > Preamble to Guidelines > 36 CFR Parts 1190 and 1191 ADA and ABA Accessibility Guidelines - Preamble (Discussion of Comments and Changes)
  Knee and Toe Clearance

  Accessible lavatories and sinks must provide knee and toe clearance for a forward approach (606.2)....

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.8.2.7 Base Support Allowance Recommendation

  To determine the necessary clearance for the footrests, the Committee used the footrest height data and subtracted the thickness of the footrests (~0.5 inch)....

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  Base Support [No specific provision—affects M303.2.4]

  The anthropomorphic data, as well as the calculated footrest clearances, are below in Tables 4 and 5. Table 4....

• Federal Documents > Technical Assistance > Guide to the ADA Standards
  Maneuvering Clearances [§404.2.4]

  Maneuvering Clearances [§404.2.4] Required maneuvering clearances provide space for opening and proceeding through doors, doorways, and gates using wheelchairs and other mobility aids...

• Federal Documents > Standards > 2010 ADA Standards
  Minimum Required Depth: ADA Standard Section 306.3.3

  Section 306.3.3 covers the current ADA Standards for the minimum required depth for knee clearance.

• State and Local Documents > Codes and Standards > 2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017
  11B-505.5 Clearance

  Clearance between handrail gripping surfaces and adjacent surfaces shall be 1½ inches (38 mm) minimum....

• State and Local Documents > Codes and Standards > 2019 California Standards
  11B-505.5 Clearance

  Clearance between handrail gripping surfaces and adjacent surfaces shall be 1½ inches (38 mm) minimum....

• Federal Documents > Standards > 2010 ADA Standards
  Maximum Depth: ADA Standard Section 306.2.2

  Section 306.2.2 covers the current ADA Standards for the maximum depth for toe clearance.

• Federal Documents > Standards > 1991 ADA Standards for Accessible Design
  4.17.4 Toe Clearances

  In standard stalls, the front partition and at least one side partition shall provide a toe clearance of at least 9 in (230 mm) above the floor....

• Federal Documents > Standards > Uniform Federal Accessibility Standards (UFAS)
  4.17.4 TOE CLEARANCES

  In standard stalls, the front partition and at least one side partition shall provide a toe clearance of at least 9 in (230 mm) above the floor....

• State and Local Documents > Codes and Standards > 2012 Florida Accessibility Code
  305.4 Knee and Toe Clearance

  305.4 Knee and Toe Clearance. Unless otherwise specified, clear floor or ground space shall be permitted to include knee and toe clearance complying with 306....

• State and Local Documents > Codes and Standards > 2022 California Standards
  11B-404.3.2 Maneuvering clearance

  Clearances at power-assisted doors and gates shall comply with Section 11B-404.2.4....

• State and Local Documents > Codes and Standards > 2025 California Standards
  11B-404.3.2 Maneuvering clearance

  Clearances at power-assisted doors and gates shall comply with Section 11B-404.2.4....

• Federal Documents > Standards > 2010 ADA Standards
  Maximum Depth: ADA Standard Section 306.3.2

  Section 306.3.2 covers the current ADA Standards for the maximum depth for knee clearance.

• Rulemaking Process Documents > ANPRMS > Withdrawn: 28 CFR Parts 35 and 36, Nondiscrimination on the Basis of Disability; Accessibility of Web Information and Services of State and Local Government Entities and Public Accommodations (ANPRM)
  A. Statutory and rulemaking history

  September, 30, 2004, the Department published an advance notice of proposed rulemaking (2004 ANPRM) to begin the process of updating the 1991 regulations to adopt revised ADA Standards based...

• State and Local Documents > Codes and Standards > 2022 California Standards
  11B-813.2.1.2 Clearance

  A 36 inches minimum (914 mm) width side clearance shall be provided along the entire length of one side of adult changing tables....

• State and Local Documents > Codes and Standards > 2025 California Standards
  11B-813.2.1.2 Clearance

  A 36 inches minimum (914 mm) width side clearance shall be provided along the entire length of one side of adult changing tables....

• State and Local Documents > Guidelines > 2013 Forest Service Trail Accessibility Guidelines (FSTAG)
  306.2 Toe Clearance

  [See subsections ...]

• State and Local Documents > Guidelines > 2013 Forest Service Trail Accessibility Guidelines (FSTAG)
  306.3 Knee Clearance

  [See subsections ...]

• Federal Documents > Technical Assistance > 2013 Forest Service Outdoor Recreation Accessibility Guidelines (FSORAG)
  306.3 Knee Clearance

  [See subsections ...]

• Federal Documents > Technical Assistance > 2013 Forest Service Outdoor Recreation Accessibility Guidelines (FSORAG)
  306.2 Toe Clearance

  [See subsections ...]

• Federal Documents > Standards > ABA Accessibility Standard for GSA Facilities Pocket Guide
  305.4 Knee and Toe Clearance

  Unless otherwise specified, clear floor or ground space shall be permitted to include knee and toe clearance complying with 306....