To increase the signal-to-noise ratio, and thereby increase speech intelligibility, either the signal must be increased, which is accomplished by increasing good reflections and reducing...
Search Results "Signal-to-Noise Ratio"
-
Meeting ANSI Standard S12.60 Requirements
-
EXECUTIVE SUMMARY
(The STI is, in effect, a measure of reverberation and noise upon the integrity of the speech source; numbers lower than 1.0 reflect degrees of degradation of the originating signal)....
-
2.1.2.2 Additional Proposed Specifications (by Oval Window Audio)
Input Signal Compression: To compensate for fluctuating signal input levels, an automatic gain control, signal compression, and/or adjustable non-distorting peak limited must be employed...
-
SENSORY PROVISIONS
information, including any auditory feedback tones that are important for the use of the product, through at least one mode in enhanced auditory fashion (i.e., increased amplification, increased signal-to-noise...
-
2.2.2.2 New York State Standards
* The minimal signal to noise ratio at the receiver's output should not be less than 35 dB. Harmonic distortion shall not be more than 10%....
-
706.5 Signal-to-Noise Ratio
The signal-to-noise ratio for internally generated noise in assistive listening systems shall be 18 dB minimum....
-
706.5 Signal-to-Noise Ratio
706.5 Signal-to-Noise Ratio. The signal-to-noise ratio for internally generated noise in assistive listening systems shall be 18 dB minimum....
-
8.1 Objective
adult listeners (49 with hearing loss and 10 without) listened binaurally to sentence materials that were subjected to three different types of distortion; reverberation and background noise...
-
8.3 Results and Discussion
Signal For purposes of statistical data management the qualitative ratings were converted to numerical values....
-
8.4 Recommendations
The signal-to-noise ratio for internally generated noise cannot be less than 18 dB. 4. The peak clipping levels down from the peak cannot be greater than 18 dB....
-
706.5 Signal-to-Noise Ratio
The signal-to-noise ratio for internally generated noise in assistive listening systems shall be 18 dB minimum. [ECTCR UFAS 4.33.7]...
-
11B-706.5 Signal-to-noise ratio
The signal-to-noise ratio for internally generated noise in assistive listening systems shall be 18 dB minimum....
-
11B-706.5 Signal-to-noise ratio
The signal-to-noise ratio for internally generated noise in assistive listening systems shall be 18 dB minimum....
-
11B-706.5 Signal-to-noise ratio
11B-706.5 Signal-to-noise ratio. The signal-to-noise ratio for internally generated noise in assistive listening systems shall be 18 dB minimum....
-
11B-706.5 Signal-to-noise ratio
The signal-to-noise ratio for internally generated noise in assistive listening systems shall be 18 dB minimum....
-
Signal-to-Noise Ratio: ADA Standard Section 706.5
The signal-to-noise ratio for internally generated noise in assistive listening systems shall be 18 dB minimum....
-
11B-706.5 Signal-to-noise ratio
The signal-to-noise ratio for internally generated noise in assistive listening systems shall be 18 dB minimum....