Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
Search Results "Vehicular Route"
Commonly Searched Documents
-
11B-308.3.1 Unobstructed
-
[A] ALTERATION
Alterations include, but are not limited to, remodeling, renovation, rehabilitation, reconstruction, historic restoration, resurfacing of circulation paths or vehicular ways, changes or...
-
Play Areas
Word Fillable Form (0.4MB) Word Non-Fillable Form (0.3MB) PDF Non-Fillable Form (0.3MB)
-
Additions: ADA Standard Section 240.1.1
Section 240.1.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for additions to play areas.
- Armor-Tile Tactile Systems Cast In Place Detectable Warning Surface System
-
Designated Aisle Seats: ADA Standard Section 221.4
Section 221.4 covers scoping requirements in the current ADA Standards for designated aisle seats in assembly areas.
-
11B-240.1.1 Additions
When the first phase was completed, at least 5 elevated play components, including at least 3 different types, were to be provided on an accessible route....
-
3. New Construction vs. Alterations
walkways are built or altered post-ADA, they must include curb ramps or other sloped areas wherever they intersect with highways, streets, or roads and pedestrians may legally cross the vehicular...
-
Alteration
Alterations include, but are not limited to, remodeling, renovation, rehabilitation, reconstruction, historic restoration, resurfacing of circulation paths or vehicular ways, changes or...
-
11B-809.9 Kitchens
Kitchens shall be on an accessible route and shall comply with this section....
-
11B-233.3.1.2.6.1 Single building with one common (lobby) entrance
lobby) entrance, located on a site with difficult terrain conditions or unusual characteristics: All ground floor units in non-elevator buildings shall be adaptable and on an accessible route...
-
11B-221.4 Designated aisle seats
At least 5 percent of the total number of aisle seats provided shall comply with Section 11B-802.4 and shall be the aisle seats located closest to accessible routes....
-
11B-106.5 Defined terms
. ◼ ACCESS AISLE ACCESSIBILITY ACCESSIBLE ACCESSIBLE ELEMENT ACCESSIBLE MEANS OF EGRESS ACCESSIBLE ROUTE ACCESSIBLE SPACE ADAPTABLE ADDITION ADJUSTED CONSTRUCTION...
-
Revolving Doors, Revolving Gates, and Turnstiles: ADA Standard Section 404.3.7
Section 404.3.7 covers the current ADA Standards for revolving doors, revolving gates, and turnstiles.
-
11B-307.5 Required clear width
Protruding objects shall not reduce the clear width required for accessible routes....
-
11B-404.3.7 Revolving doors, revolving gates, and turnstiles
Revolving doors, revolving gates, and turnstiles shall not be part of an accessible route....
-
11B-404.2.1 Revolving doors, gates, and turnstiles
Revolving doors, revolving gates, and turnstiles shall not be part of an accessible route....
-
11B-812.5.5 Obstructions
EVCS shall be designed so accessible routes are not obstructed by cables or other elements....
-
Clear Width: ADA Standard Section 1008.2.4
Accessible routes connecting play components shall provide a clear width complying with 1008.2.4....
-
General: ADA Standard Section 406.1
Section 406.1 of the ADA Standards covers information in the current ADA Standards for curb ramps.
-
Additional Number and Types: ADA Standard Section 240.2.1.2
Section 240.2.1.2 covers scoping requirements in the current ADA Standards for additional number and types of ground level play components.
-
11B-240.2.1.2 Additional number and types
TABLE 11B-240.2.1.2 NUMBER AND TYPES OF GROUND LEVEL PLAY COMPONENTS REQUIRED TO BE ON ACCESSIBLE ROUTES NUMBER OF ELEVATED PLAY COMPONENTS PROVIDED MINIMUM...
-
Shared Use Path
See AASHTO Guide, 5.2.2, Shared Use Paths Adjacent to Roadways (Sidepaths). 1 The FHWA defines a shared use path as a multiuse trail or path physically separated from motorized vehicular...
- CalCasp Training: 2016 California Building Code Chapter 11B