Where provided, at least one parking space shall comply with 1012.3, 1012.4, and 1012.5....
Search Results "Clear Floor Space"
Filters
Commonly Searched Documents
-
F245.2.5.2 Parking Spaces
-
11B-805.4.3 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
Load and Unload Areas
Load and Unload Areas The floor or ground surface in the load and unload areas must have a slope not steeper than 1:48 and be stable, firm, and slip resistant....
-
Den
Pull-out keyboard and utility tray for seated users unable to use a laptop Non-slip oil finish on floor FSC certified maple floor in the den and dining room....
-
Circulation Paths Serving Exempted Spaces [§203]
Circulation Paths Serving Exempted Spaces [§203] Portions of common use circulation paths serving exempt spaces within a work area are not required to comply, including routes to...
-
603.2.1 Turning Space
603.2.1 Turning Space. Turning space complying with 304 shall be provided within the room....
-
612.3 Turning Space
612.3 Turning Space. A turning space complying with 304 shall be provided within saunas and steam rooms....
-
11B-605.5.2 Maneuvering clearance
A minimum 66 inches (1676 mm) wide and 66 inches (1676 mm) deep maneuvering space shall be provided in front of the urinal....
-
1016.8.4 Turning Space
This section requires a turning space complying with 304.2.3 of the Architectural Barriers Act Accessibility Guidelines where resting intervals are provided adjacent to an outdoor recreation...
-
703.2.7 Character Spacing
703.2.7 Character Spacing. Character spacing shall be measured between the two closest points of adjacent raised characters within a message, excluding word spaces....
-
Guest Room Doors and Doorways: ADA Standard Section 224.1.2
Section 224.1.2 covers scoping requirements in the current ADA Standards for transient lodging guest room doors and doorways.
-
Openings [§302.3]
Openings [§302.3] Openings in ground and floor surfaces, such as grates, are limited in width to prevent passage of a ½” diameter sphere....
-
11B-302.3 Openings
Openings in floor or ground surfaces shall not allow passage of a sphere more than ½ inch (12.7 mm) diameter except as allowed in Sections 11B-407.4.3 _|Platform to Hoistway Clearance|_,...
-
11B-216.5 Parking and electric vehicle charging facilities
Signs identifying parking spaces and signs within parking facilities shall comply with Section 11B-216.5....
-
Wheelchair Spaces, Ride Seats Designed for Transfer, and Transfer Devices: ADA Standard Section 206.2.9.2
Section 206.2.9.2 covers the ADA Standards for accessible routes to wheelchair spaces, ride seats designed for transfer and transfer devices in amusement rides.
-
808.2 Turning Space
808.2 Turning Space....
-
703.2.8 Line Spacing
703.2.8 Line Spacing....
-
§ 38.53(a)(1)
(1) Passenger doorways on vehicle sides shall have clear openings at least 32 inches wide when open....
-
1017.8.4 Turning Space
Where resting intervals are provided adjacent to the trail tread, a turning space complying with 304.3.2 shall be provided. ...
-
1017.8.4 Turning Space
Where resting intervals are provided adjacent to the trail tread, a turning space complying with 304.3.2 shall be provided....
-
703.2.7 Character Spacing
Character spacing shall be measured between the two closest points of adjacent raised characters within a message, excluding word spaces....
-
703.2.7 Character Spacing
Character spacing shall be measured between the two closest points of adjacent raised characters within a message, excluding word spaces....
-
A4.10.12 CAR CONTROLS
In many cases, it will be possible to locate the highest control on elevator panels with 48 in (1220 mm) from the floor....
-
§ 38.53(d)(3) Exception
Retrofitted vehicles shall be coordinated with the platform in new and key stations such that the horizontal gap shall be no greater than 4 inches and the height of the vehicle floor, under...