Character spacing shall be measured between the two closest points of adjacent characters, excluding word spaces....
Search Results "Wheelchair Space (Medical Diagnostic Equipment)"
-
T702.6 Character Spacing
-
Is network architecture covered by the FCC's Section 255 rules?
In addition to covering equipment and services, the FCC's rules require network architecture to be designed in a way that does not hinder access by people with disabilities....
-
1009.5.2 Transfer Space
1009.5.2 Transfer Space....
-
203 General Exceptions
203 General Exceptions Limited Access Spaces and Machinery Spaces....
-
R305.1.2 Dome Spacing
R305.1.2 Dome Spacing....
-
304 Turning Space
[See subsections ...]
-
705.1.2 Dome Spacing
705.1.2 Dome Spacing....
-
Does a wheelchair user have to use the seat belt and shoulder harness?
Under the broad nondiscrimination provisions in Section 37.5 of the DOT ADA regulations, a transit operator is not permitted to mandate the use by wheelchair users of seat belts and shoulder...
-
M301.4.2 Clearance Around Base
[See subsections ...]
-
"Other Power-Driven Mobility Device" and "Wheelchair" (Section-by-Section Analysis)
‘‘Other Power-Driven Mobility Device'' and ‘‘Wheelchair'' (Section-by-Section Analysis) Because relatively few individuals with disabilities were using nontraditional mobility devices...
-
1009.5.2 Transfer Space
A transfer space of 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum with a slope not steeper than 1:48 shall be provided at the base of the transfer platform surface and shall...
- Portlight Inclusive Disaster Strategies
-
Clear Floor or Ground Space
Clear Floor or Ground Space At least one clear floor or ground space (30 inches by 48 inches minimum) must be provided at each location that has a railing height of 34 inches maximum....
- Diversified Woodcrafts ADA Instructor's Desk 1216K-L-ADA
- Figure 305.7.2 Maneuvering Clearance in an Alcove, Parallel Approach – Drawing from the U.S. Access Board
- Figure 305.7.1 Maneuvering Clearance in an Alcove, Forward Approach – Drawing from the U.S. Access Board
-
11B-203.4 Limited access spaces
Spaces not customarily occupied and accessed only by ladders, catwalks, crawl spaces, or very narrow passageways shall not be required to comply with these requirements or to be on an accessible...
-
11B-203.4 Limited access spaces
Spaces not customarily occupied and accessed only by ladders, catwalks, crawl spaces, or very narrow passageways shall not be required to comply with these requirements or to be on an accessible...
- Figure 304.3.2 T-Shaped Turning Space – Drawing from the U.S. Access Board
-
R304.5.5 Clear Space
R304.5.5 Clear Space....
-
Executive Summary
Executive Summary Standards for accessible design include requirements based on the anthropometry of wheeled mobility users. Key requirements apply to clear floor area, reach...
-
705.1.2 Dome Spacing
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 1.6 inches (41 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...