Gates which must be pushed open by wheelchair or mobility aid users shall have a smooth continuous surface extending from 2 inches above the floor to 27 inches above the floor....
Search Results "Positioning Aids"
-
10.3.1(19)
-
§ 38.111(a)(2)
Single-level dining and lounge cars shall have at least one connecting doorway complying with §38.113(a)(2) of this part connected to a car accessible to persons using wheelchairs or mobility aids...
-
V. Public Information Systems
However, it should be noted that while visual display systems accommodate persons who are deaf or are hearing impaired, assistive listening systems aid only those with a partial loss of...
-
§ 37.209 Training and other requirements
as appropriate to the duties of particular employees, training in proper operation and maintenance of accessibility features and equipment, boarding assistance, securement of mobility aids...
-
§ 38.113(b) Passageway
Doorways required to be accessible by paragraph (a) of this section shall permit access by persons using mobility aids and shall have an unobstructed passageway at least 32 inches wide leading...
-
Why Consumers Are Choosing Black-Owned Online Marketplaces
As more people seek meaningful shopping experiences and want their purchases to have a positive impact, Black-owned online marketplaces continue to attract loyal customers and expand their...
- Sears Brands, LLC Craftsman 24 in. Digital LaserTrac® Level
-
Bathroom Do’s and Dont’s
Some guests prefer using the rubber mat to help stabilize mobility aid devices. ...
-
EXHIBIT A
All communication aids and services are provided FREE OF CHARGE. If you need further assistance, please ask your nurse or other Hospital Personnel....
-
R308.1.2.1 Platform and Vehicle Floor Coordination
Boarding platforms shall be positioned to coordinate with vehicles in accordance with the applicable requirements in 49 CFR parts 37 and 38....
-
12113(c) Qualification standards and tests related to uncorrected vision
selection criteria based on an individual’s uncorrected vision unless the standard, test, or other selection criteria, as used by the covered entity, is shown to be job-related for the position...
-
404.2.7 Door and Gate Hardware
Where sliding doors are in the fully open position, operating hardware shall be exposed and usable from both sides....
-
404.2.7 Door and Gate Hardware
Where sliding doors are in the fully open position, operating hardware shall be exposed and usable from both sides....
-
Conclusion
The opinions expressed herein do not necessarily reflect the position or policy of the U.S. Department of Labor....
-
Is latch-side maneuvering clearance as specified in the Standards applicable to doors with panic bars?
Latch-side clearance not only provides proper positioning at door hardware but also facilitates proceeding through doors against the force of closers....
-
§ 38.159(b)(2)(ii) Exception
., “rotary lift”), the requirements of this paragraph (b)(2) prohibiting the lift from being stowed while occupied shall not apply if the stowed position is within the passenger compartment...
-
11B-813.2.10 Door swing
A door, in any position, shall be permitted to encroach into the turning space by 12 inches (305 mm) maximum....
- BEA Inc. LZR-Microscan Swinging Door Sensor
-
III-3.8000 Direct threat
be eliminated or reduced to an acceptable level by reasonable modifications to the public accommodation's policies, practices, or procedures or by the provision of appropriate auxiliary aids...
-
11B-904.4.1 Parallel approach
A clear floor or ground space complying with Section 11B-305 shall be positioned for a parallel approach adjacent to the 36 inch (914 mm) minimum length of counter....
-
Eunice Noell-Waggoner, IES, LC. Value, Contrast and Reflections
A negative example is shown in slide 3, left photo; a positive example is shown in slide 3, right photo....
-
11B-604.2 Location
The water closet shall be positioned with a wall or partition to the rear and to one side....
-
11B-904.4.1 Parallel approach
A clear floor or ground space complying with Section 11B-305 shall be positioned for a parallel approach adjacent to the 36 inch (914 mm) minimum length of counter....
-
11B-604.2 Location
The water closet shall be positioned with a wall or partition to the rear and to one side....