(3) Acquisition or modification of equipment or devices; and...
Search Results "Fixed Equipment"
-
Sec.36.303(b)(3)
-
§ 36.303(b)(3)
(3) Acquisition or modification of equipment or devices; and...
-
4.34.7.3 CONTROLS
Laundry equipment shall comply with 4.27....
-
For a new public building, if EV charging equipment is not installed at this time, what is the extent of the infrastructure that an installer is required to show for plan check review?
RESPONSE: Plans and specifications must accurately describe the full extent of the work to be performed. Some enforcement jurisdictions (primarily city- and county building...
-
903.3.1.1.1 Exempt locations
Sprinklers shall not be omitted from any room merely because it is damp, of fire-resistance-rated construction or contains electrical equipment....
-
Number of TTYs
Every call-taking position needs its own TTY equipment because experience has shown that: With TTY or TTY-compatible equipment at each call-taking position, call takers can handle TTY...
-
Section 1193.39 Prohibited reduction of accessibility, usability and ompatibility
Section 1193.39 provides that no change shall be undertaken which decreases or has the effect of decreasing the net accessibility, usability, and compatibility of telecommunications equipment...
-
Assistive Device:
Any piece of equipment that assists a passenger with a disability in carrying out a major life activity....
-
4.1.3(17)(b)
(b)* All telephones required to be accessible and complying with 4.31.2 through 4.31.8 shall be equipped with a volume control....
-
Make Technology Work for Everyone: introducing digital accessibility
The video is a collaboration between the steering group of Citizens Online’s, Fix the Web project (http://fixtheweb.net/) , the Digital Accessibility Centre (http://digitalaccessibilitycentre.org...
-
Manufacturer (Section-by-Section Analysis)
Manufacturer (Section-by-Section Analysis) This definition is provided as a shorthand reference for a manufacturer of telecommunications equipment and customer premises equipment....
-
BENEFITS AND COSTS: OVERVIEW
determined that transfer surface height requirements lower than 19 inches would increase the cost of designing and manufacturing examination tables, reduce the rate of adoption of accessible equipment...
-
Clearances Around Gripping Surfaces
The Access Board is considering whether 1½ inches minimum clearance around the gripping surface would be appropriate for transfer supports on diagnostic equipment used by patients in a supine...
-
2. What does the ADA require for accessibility of pools?
One means of entry/exit must be a fixed pool lift or sloped entry; the other entry can be a transfer wall, transfer system, or pool stairs....
-
III-7.5180 Assembly areas
In addition, at least one percent of all fixed seats must be aisle seats without armrests (or with removable armrests) to allow for transfer from a wheelchair....
-
Executive Summary
Access Board), in consultation with the Food and Drug Administration (FDA), to issue accessibility standards for medical diagnostic equipment (MDE) to accommodate adults with disabilities...
-
10. How quickly must an employer respond to a request for reasonable accommodation?
Example B: An employee who is blind requests adaptive equipment for her computer as a reasonable accommodation....
-
B. Patient Protection and Affordable Care Act and Section 510 of the Rehabilitation Act
The statute provides that the standards must allow for independent access to and use of the equipment by individuals with disabilities to the maximum extent possible....
-
11B-802.1.2 Width
It should be noted that although side access to the wheelchair space is allowed, fixed companion seating also must be provided adjacent to each wheelchair space.◼ FIGURE 11B-802.1.2...
-
404.2.4.3 Recessed Doors and Gates
A door can be recessed due to wall thickness or because of the placement of casework and other fixed elements adjacent to the doorway....
-
T704.2.1 Audible and visible notification
Audible and visible notification shall be provided onboard indicating when passengers have requested to disembark at the next stop on the fixed route....
-
11B-411.2.3.2 Car designation signs
Applied plates are acceptable if they are permanently fixed to the jamb....
-
DOT Response
However, the statute imposes a good faith effort requirement for acquiring used vehicles only on fixed-route systems, not demand-responsive systems for the general public....
-
R213 Transit Stops and Transit Shelters (Section-by-Section Analysis)
Transit stops in the public right-of-way typically serve fixed route bus systems, including bus rapid transit systems, and light rail transit systems....