Back support shall be 48 inches (1219 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (457 mm) minimum above the seat...
Search Results "Built-In Seating"
-
11B-903.4 Back support
-
11B-903.4 Back support
Back support shall be 48 inches (1219 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (457 mm) minimum above the seat...
-
11B-805.3.1 Wheelchair spaces
Where seating is provided in waiting rooms, at least 5 percent of the seating shall be wheelchair spaces complying with Section 11B-802.1....
-
11B-805.3.1 Wheelchair spaces
Where seating is provided in waiting rooms, at least 5 percent of the seating shall be wheelchair spaces complying with Section 11B-802.1....
-
11B-805.3.1 Wheelchair spaces
Where seating is provided in waiting rooms, at least 5 percent of the seating shall be wheelchair spaces complying with Section 11B-802.1....
-
Sell-outs of specific price ranges. (Section-by-Section Analysis)
The third approach described at § 35.138(f)(3) would permit a public entity to release unsold accessible seats in a specific price range if all other standard seats in that price range were...
-
11B-306.2.3 Minimum required depth
The toe clearance shall extend 19 inches (483 mm) minimum under built-in dining and work surfaces required to be accessible by Section 11B-226.1....
-
Knee Clearance: Clearance as Measured from Distal Knee Point - Manual Wheelchair
This depicts knee and toe clearance required by manual chair users for forward approach to elements in the built environment (e.g., lavatories, drinking fountains)....
-
Knee Clearance: Clearance as Measured from Anterior-Most Abdomen Point - Manual Wheelchair
This depicts knee and toe clearance required by manual chair users for forward approach to elements in the built environment (e.g., dining tables)....
-
Curb Ramps [§406]
Curb Ramps [§406] Requirements for curb ramps apply to ramps that cut through curbs or are built up to them....
-
1.1.9 Horizontal gaps and vertical alignment
local horizontal discontinuities and variations in vertical alignment such as at concrete joints, gaps, grade breaks, and at the interface of concrete with other materials or elements built...
-
11B-306.2.3 Minimum required depth
The toe clearance shall extend 19 inches (483 mm) minimum under built-in dining and work surfaces required to be accessible by Section 11B-226.1....
-
Before January 26, 1992
Before January 26, 1992 Facilities built before January 26, 1992, are referred to as “pre-ADA” facilities.25 If there is an architectural barrier to accessibility in a pre-ADA facility,...
-
The Americans with Disabilities Act
physical changes to their stores or places of business to provide accessibility to wheelchair users and other people with disabilities, the ADA has requirements for existing facilities built...
-
Scenario 8 – Accessibility
The school was built in the early 1960s and, due to limited resources, the district has never altered the building....
-
11B-302.2 Carpet
However, if floor mats are built-in as part of new construction or alterations, and are part of an accessible route, they must comply with the accessibility provisions of this section and...
-
11B-302.2 Carpet
However, if floor mats are built-in as part of new construction or alterations, and are part of an accessible route, they must comply with the accessibility provisions of this section and...
-
11B-302.2 Carpet
However, if floor mats are built-in as part of new construction or alterations, and are part of an accessible route, they must comply with the accessibility provisions of this section and...
-
§382.61(a)
(a) As a carrier, you must ensure that aircraft with 30 or more passenger seats on which passenger aisle seats have armrests are equipped with movable aisle armrests on at least one-half...
-
11B-221.2.3.2 Vertical dispersion
In bleachers, wheelchair spaces shall not be required to be provided in rows other than rows at points of entry to bleacher seating....
-
11B-221.2.3.2 Vertical dispersion
Vertical, center, or side aisles adjoining bleacher seating that are stepped or tiered are not considered entry points. ...
-
11B-221.2.3.2 Vertical dispersion
In bleachers, wheelchair spaces shall not be required to be provided in rows other than rows at points of entry to bleacher seating....
-
11B-903.4 Back support
Back support shall be 48 inches (1219 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (457 mm) minimum above the seat...
-
§382.83(a)(1)
(1) You may “block” an adequate number of the seats used to provide the seating accommodations required by §382.81....