Restaurants and Lounges When a guest who is blind or who has low vision is entering, leaving, or maneuvering through a restaurant, you should offer to provide assistance using the techniques...
Search Results "Maneuvering Clearance (Alcove)"
Commonly Searched Documents
-
Restaurants and Lounges
-
Bathroom
To specify space for wheelchair maneuvering in a powder room would, in most cases, require enlarging the room significantly....
-
1134A.8 Lavatories, vanities, mirrors and towel fixtures
A clear maneuvering space at least 30 inches by 48 inches (762 mm by 1219 mm) shall be provided at lavatories and shall be centered on the lavatory. 3. Cabinets....
-
18 Inch Low Height
Steinfeld stated it could be a reasonable compromise since the group most affected by increasing the height would be manual wheelchair users who could accommodate a 1 inch change in vertical clearance...
-
R306.3.2 Pedestrian Activated Signals
a flashing yellow signal, then a steady yellow signal, then two steady red signals during the pedestrian walk interval, and then alternating flashing red signals during the pedestrian clearance...
-
Areas of Rescue Assistance [4.1.3(9), 4.3.11]
The minimum 48 inch width, measured between the leading edge of handrails, provides clearance for assisted evacuation....
-
Minimum Green Times
3.3 6.1 8.5 9.7 Segway 4 4.5 7.8 10.7 13.9 AASHTO calculation 5.2 9.8 11.4 12.8 Pedestrian clearance...
-
1. Access Barrier Removal in Existing Pedestrian Facilities
non-compliant cross-slopes in sidewalks or sections of sidewalks; (7) removal of protruding and overhanging objects and/or obstructions; (8) widening of pedestrian rights of way; (9) providing clearance...
-
2. Follow the Accessibility Standards for Play Areas
Where accessible routes serve ground level play components: • The vertical clearance shall be 80 inches high minimum. • The running slope not steeper than 1:16 or 6.25%....
- AJW Architectural Products UG30-A Series UG30-A12 12" Concealed Set Screw Flange, 1.5" Diameter Grab Bar - Configuration A
- AJW Architectural Products UG20-A Series UG20-A12 12" Concealed Set Screw Flange, 1.25" Diameter Grab Bar - Configuration A
- Activar Hiawatha HG111 & HG112 Straight Tubular Pulls and HG113 & HG114 Push Bars
- Door King Inc. 1150 Overhead Gate and Door opener
-
Lavatories Adjacent to Partitions
Per 11B-606.2, we know that a clear space positioned for a forward approach is required (with exceptions), with proper knee and toe clearance. ...
-
Doors at Entrances to Businesses
It may also be possible to use special "swing clear" hinges that provide approximately 1 1/2 inches more clearance without replacing the door and door frame....
-
Accessible Boat Slips
Other accessible slips can be located perpendicular to the end of the pier with clearance extending the width of the slip....
-
Grab bars
When two grab bars are provided there should be at least a 24-inch clearance between them....
-
Minimum Number [9.1.2 and 9.1.3]
NOTE *minimum door clearance required in all sleeping rooms and suites FACILITY TOTAL VISUAL APPLIANCES ONLY Total MOBILITY ACCESS & VISUAL APPLIANCES Total...
-
4.3.5.2 180-degree turn
4.3.5.2 180-degree turn Currently, the ADA-ABA does not have a specific clearance for this type of turn. The 1525 mm (60 in.) turning space would be used instead....
-
Types of Alternative Designs
alternatives: Water Closet: The water closet was moved further away from the sidewall (> 18+" from the sidewall to the centerline of toilet as specified in ADAAG) to provide more clearance...
-
Guidelines for Requirement 2
vertical height requirement at passenger loading zones as the minimal vertical clearance for garage parking....
-
5.8.1.1 Clear Platform Size Recommendation
This size platform allows the person to maneuver and position the device even though many devices may not stop precisely in the middle of the platform....
-
1134A.5 Bathtubs
There shall be a minimum clear floor space 48 inches parallel by 30 inches perpendicular (1219 mm by 762 mm) to the side of a bathtub or bathtub-shower combination to provide for the maneuvering...