Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
Search Results "Enhanced 9-1-1"
-
11B-411.2.1.5.1 Size
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
Appendix A
Appendix A Building Name Barrier Page Ansin 1-9 2 Baker 10-18 4 Bowdoin Street Clinic 19-50 6...
-
F235.2 Boat Slips
Table 235.2 Boat Slips Total Number of Boat Slips Provided in Facility Minimum Number of Required Accessible Boat Slips 1 to 25 1 26 to 50...
-
235.2 Boat Slips
Table 235.2 Boat Slips Total Number of Boat Slips Provided in Facility Minimum Number of Required Accessible Boat Slips 1 to 25...
-
11B-609.3 Spacing
The space between the wall and the grab bar shall be 1½ inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1½ inches (38 mm) minimum....
-
11B-609.3 Spacing
The space between the wall and the grab bar shall be 1½ inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1½ inches (38 mm) minimum....
-
11B-216.5.1 Parking spaces
Exceptions: 1. Reserved. [2010 ADA Standards] 1....
-
11B-216.5.1 Parking spaces
Exceptions: 1. Reserved. [2010 ADA Standards] 1....
-
TownSteel "C" Rose Tubular Lockset
The "C rose is 9/32" in projection, and 2-17/32" in diameter. ...
-
Disability
Under Section 504, an individual with a disability (also referred to as a student with a disability in the elementary and secondary education context) is defined as a person who: (1) has...
-
ENTRANCE
[HCD 1, HCD 2, HCD-1/AC and DSA-AC] Any access point to a building or portion of a building or facility used for the purpose of entering....
-
Accessible Parking Video Fact Sheet
Technical assistance for these standards is available by calling 1-800-949-4232....
-
Accessible Routes: ADA Standard Section 1007.2
EXCEPTIONS: 1. Playing surfaces shall not be required to comply with 302.2. 2....
-
Gripping Surface: ADA Standard Section 505.6
Section 505.6 covers the current ADA Standards for the handrail gripping surface.
-
11B-809.8.3.1 Floor or ground surface
Floor or ground surface within required maneuvering clearances shall not have slopes exceeding 1:48....
-
12102(4)(E)(iii)(II)
(II) the term ‘low-vision devices’ means devices that magnify, enhance, or otherwise augment a visual image....
-
Mockett CH11 Longhorn Coat Hook
Size: 5 9/32" wide, 1 31/32" base diameter, 1 25/32" projection. Mounting hardware included. Finish: Base is Polished Chrome....
-
Automatic and Power-Assisted Doors and Gates: ADA Standard Section 404.3
Section 404.3 covers the current ADA Standards for automatic and power-assisted doors and gates.
-
Q: If a PSAP has only received a few TTY calls per month over the past year, why does it need TTYs at every call-taking position?
Historically, many persons who use TTYs have not had confidence in the accessibility of 9-1-1 services and have not attempted to make direct TTY calls to their PSAP....
-
General: ADA Standard Section 505.1
Section 505.1 of the ADA Standards covers information in the current ADA Standards for handrails.
-
11B-505.1 General
Handrails are not required on walking surfaces with running slopes less than 1:20....
-
11B-505.1 General
Handrails are not required on walking surfaces with running slopes less than 1:20....
-
About This Tool Kit
This first two installments of the Tool Kit include: Chapter 1, ADA Basics (HTML) | PDF: Statute and Regulations....
