To comply with ADA requirements, the curb ramps provided must meet specific standards for width, slope, cross slope, placement, and other features.3 In constructing facilities such as walkways...
Search Results "Counter Slope"
-
D. What Does Title II of the ADA Require with Respect to Curb Ramps at Pedestrian Crossings?
-
3. Review the Research Findings About Accessibility Issues for Play Surfaces
Deficiencies (excessive running slope, cross slope, change in level, or openings) for PIP, TIL and HYB began to emerge 24-36 months after installation....
-
5.8.2.7 Base Support Allowance Recommendation
The Committee also discussed adding an allowance for a sloped region at the base of the gantry....
-
Legislation
The current ADAAG guidelines (Table 1) provide a description of the suggested width and slope, but do not provide guidance on pathway roughness except that obstacles should be no more than...
-
6. Recognize that Proper Installation of Play Surface Systems is Key
Site plans and construction drawings should provide details like maximum running slopes and cross slopes, beveled edges, transitions, adjoining seams and affixing the surface material to...
-
11B-805.6 Hand washing fixtures, lavatories and sinks
high minimum above the finish floor or ground at a depth of 8 inches (203 mm) minimum increasing to 29 inches (737 mm) high minimum above the finish floor or ground at the front edge of a counter...
-
11B-805.6 Hand washing fixtures, lavatories and sinks
high minimum above the finish floor or ground at a depth of 8 inches (203 mm) minimum increasing to 29 inches (737 mm) high minimum above the finish floor or ground at the front edge of a counter...
-
Allegion Falcon 2390 Series Recessed Exit Device
End Caps: Sloped metal end caps ANSI: Certified ANSI A156.3 Grade 1 standards Vertical Rods: 7' standard, extension rods available up to 10'....
-
11B-604.3.2 Overlap
2-11B, dated 9/9/14, which includes the following interpretation of Subsection 11B-604.3.2: Showers are fixtures including a 30 inch x 60 inch clear receptor with a minimum/maximum slope...
-
11B-604.3.2 Overlap
2-11B, dated 9/9/14, which includes the following interpretation of Subsection 11B-604.3.2: Showers are fixtures including a 30 inch x 60 inch clear receptor with a minimum/maximum slope...
-
1007.1 Accessible means of egress required
In assembly areas with sloped or stepped aisles, one accessible means of egress is permitted where the common path of travel is accessible and meets the requirements in Section 1028.8, and...
-
Shower Threshold
The proposed rule specified a maximum threshold height of ½ inch, provided that those greater than ¼ inch are beveled with a slope of 1:2 maximum (608.7)....
-
Fishing piers and platforms. (Section-by-Section Analysis)
attached to land) are involved, a number of exceptions are provided from the general standards for accessible routes in order to take into account the difficulty of meeting accessibility slope...
-
Fishing piers and platforms. (Section-by-Section Analysis)
attached to land) are involved, a number of exceptions are provided from the general standards for accessible routes in order to take into account the difficulty of meeting accessibility slope...
-
Location
The slope along the accessible route should not be greater than 1:12 in the direction of travel....
-
Technical Infeasibility
plumbing, life safety or other codes (such as when combining two toilet stalls to create an accessible stall would violate the plumbing code’s required fixture count); meeting slope...
-
Location
The slope along the accessible route should not be greater than 1:12 in the direction of travel....
-
11B-505.6 Gripping surface
Exceptions: Where handrails are provided along walking surfaces with slopes not steeper than 1:20, the bottoms of handrail gripping surfaces shall be permitted to be obstructed along...
-
Thresholds at Exterior Doors/Thresholds to Balconies or Decks
The Guidelines further provide that the finished surface of this area, located immediately outside the entry door, may be sloped for drainage, but the sloping may be no more than 1/8 inch...
-
11B-206.2.1 Site arrival points
(1) Newly constructed or altered streets, roads, and highways must contain curb ramps or other sloped areas at any intersection having curbs or other barriers to entry from a street...
-
1.0 APPLICATION
While the new or altered furnishing must be accessible the clear floor or ground space shall not be required to comply with surface and slope requirements until the surface and slope alteration...
-
Selection of Locations
The 11 test plots were installed in a previously undisturbed wetlands area where the maximum running slope of any of the sections was 7.6 percent....
-
11B-206.2.1 Site arrival points
(1) Newly constructed or altered streets, roads, and highways must contain curb ramps or other sloped areas at any intersection having curbs or other barriers to entry from a street...
