Controls shall be between the bathtub rim and grab bar, and between the open side of the bathtub and the centerline of the width of the bathtub....
Search Results "Compartment Width"
-
607.5 Controls
-
1.1.11 Ramp running slope
Measure for overall running slope of ramps by determining elevations at the top and bottom of the ramp at the midpoint of the width of each ramp run and calculate the slope using the horizontal...
-
CRL Jackson 900 Series Floor Mounted Door Closers
08 7100 CRL Jackson Narrow Width Floor Mounted Door Closers 264 Lb....
-
H. Men's Spa and Fitness Center Locker Room
(2) Defendants will convert the accessible shower compartment in the Men's Spa Dressing Room and Men's Fitness Center Locker room to a compliant shower including compliant controls,...
-
1009.5.6 Size
Each transfer step shall have a tread clear depth of 14 inches (355 mm) minimum and 17 inches (430 mm) maximum and shall have a tread clear width of 24 inches (610 mm) minimum....
-
810.9 Escalators
Where provided, escalators shall comply with the sections 6.1.3.5.6 and 6.1.3.6.5 of ASME A17.1 (incorporated by reference, see "Referenced Standards" in Chapter 1) and shall have a clear width...
-
810.9 Escalators
Where provided, escalators shall comply with the sections 6.1.3.5.6 and 6.1.3.6.5 of ASME A17.1 (incorporated by reference, see "Referenced Standards" in Chapter 1) and shall have a clear width...
-
404.2.4 Maneuvering Clearances
Maneuvering clearances shall extend the full width of the doorway and the required latch side or hinge side clearance....
-
1133A.2.1, Item 2
designed with a cooktop or sink located at the base of the U, which provides a knee and toe space in accordance with Section 1133A.7 to allow for a forward approach, shall have a clear width...
-
4.9.2 TREADS AND RISERS
On any given flight of stairs, all steps shall have uniform riser heights and uniform tread widths....
-
1133A.2.1, Item 2
designed with a cooktop or sink located at the base of the U, which provides a knee and toe space in accordance with Section 1133A.7 to allow for a forward approach, shall have a clear width...
-
ยง 38.25(b) Contrast
All step edges, thresholds and the boarding edge of ramps or lift platforms shall have a band of color(s) running the full width of the step or edge which contrasts from the step tread and...
-
407.4.1 Car Dimensions
Inside dimensions of elevator cars and clear width of elevator doors shall comply with Table 407.4.1....
-
Signal Clearance Intervals
Table 21 shows the number of seconds required for the 85th percentile user for various vehicular types to clear roadways of a given width....
-
Toilet and Bathing Rooms
A commenter recommended that in shower compartments rectangular seats as provided in section 610.3.1 of the 2010 Standards should not be permitted as a substitute for L-shaped seats as provided...
-
Boolee Multi-Station Voting Booth
Twin With ADA Compliant Station Height: 60" Depth: 24" Width: 59" Tables: 18x25.5" 18x29" Table Heights: 39.5 - 32.5" Folded Width: 7.0" Weight: 22 lbs...
-
Scope: ADA Standard Section 201.1
Section 201 discusses the scope of the ADA Standards.
-
1. Desk size
To provide adequate knee and leg clearance, desks and writing tables need to have at least 30 inches of knee width, 29 inches of knee height, and 19 inches of leg depth....
-
502 Parking Spaces
Substantive changes pertain to the: width of spaces, including van spaces, and access aisles (502.1 and 502.2) location of access aisles for angled van spaces (502.3.4)...
-
Public Way
parcel of land open to the outside air leading to a public street, which has been deeded, dedicated or otherwise permanently appropriated to the public for public use and which has a clear width...
-
11B-607.5 Controls
Controls shall be between the bathtub rim and grab bar, and between the open side of the bathtub and the centerline of the width of the bathtub....
-
4.3.4 Passing Space
If an accessible route has less than 60 in (1525 mm) clear width, then passing spaces at least 60 in by 60 in (1525 mm by 1525 mm) shall be located at reasonable intervals not to exceed...
-
4.3.4 PASSING SPACE
If an accessible route has less than 60 in (1525 mm) clear width, then passing spaces at least 60 in by 60 in (1525 mm by 1525 mm) shall be located at reasonable intervals not to exceed...
-
Rockwood Manufacturing Company K1038 .038" Thick - Metal Kick Plate
Material: .038" Aluminum, Stainless Steel Fastener: #6 x 5/8 OH SMS Ordering: Specify height x width x finish code. Add any options. Weight: 8" x 34" = 3.2 lbs....
