Flush valves and related plumbing can be located behind walls or to the side of the toilet, or a toilet seat lid can be provided if plumbing fittings are directly behind the toilet seat....
Search Results "Recessed Toilet Paper Dispenser"
Commonly Searched Documents
-
A4.16.5 FLUSH CONTROLS
-
Add more examples of different types of doors
Another example you might add would be a glass door without a kick plate and glass that is recessed on all (4) sides surrounded by a metal frame....
-
H. Stall Door
If the accessible toilet is in a stall, is the stall door positioned diagonally opposite, not directly in front of, the toilet so persons who use wheelchairs may pull fully into the stall...
-
11B-213.3.4 Lavatories
Where lavatories are provided, at least ten percent but no fewer than one shall comply with Section 11B-606 and shall not be located in a toilet compartment. ...
-
4.3.9 Doorway Design
the passage task on the pull sides of Doors 1, 800 mm (31.5 in.) latch clearance, and Door 2, 406 mm (16 in.) latch clearance, demonstrate that an 457 mm (18 in.) clearance required in recessed...
-
11B-809.10.3 Powder rooms
When the powder room is the only toilet facility located on an accessible level it shall, in addition, comply with Sections 11B-809.10.4, 11B-809.10.7 and 11B-809.10.8....
-
4.34.3(4) Bins
Where bins are provided, for envelopes, waste paper, or other purposes, at least one of each type provided shall comply with the applicable reach ranges in paragraph (1), (2), or (3) of...
-
Toilet Compartment Access
Hello and Good day!, I have a code official enforcing §604.8.1.2 literally to the Figure shown in the 2010 ADA Standards and would like help to clarify their understanding if...
-
Coat Hooks and Shelves
Section 213.3.7 addresses coat hooks and shelves provided in accessible toilet rooms, toilet compartments, and bathing facilities and references corresponding technical criteria for such...
-
FIGURE INDEX
Swinging Doors and Gates Figure 404.2.4.2 Maneuvering Clearances at Doorways without Doors, Sliding Doors, Gates, and Folding Doors Figure 404.2.4.3 Maneuvering Clearances at Recessed...
-
11B-246.2 Camping facilities
Permanent toilet and bathing facilities serving campsites shall comply with Section 11B-603....
- Bobrick Recessed Heavy Duty Specimen Pass-Through Cabinet B-50517
- AJW Architectural Products US80 Security Soap Dish, Chase Mount - Recessed
- Inpro Corporation JointMaster® 441 Series-Recessed Mount Expansion Joint
- Bobrick Recessed Heavy Duty Specimen Pass-Through Cabinet B-50516
- Mockett PCS46/ALM Recessed Aluminum Grommet with 6 Power & 4 Data
-
Grab Bars: ADA Standard Section 604.5
Section 604.5 covers the current ADA Standards for grab bars that are used for water closets.
-
Height and Clearances [4.19.2]
Deep lavatories or countertops make it difficult to locate soap dispensers, faucet controls, and other elements mounted above lavatories within reach range since a seated reach usually does...
-
Shower Compartments
The 2010 Standards add a new exception that permits a 2-inch maximum curb in transfer-type showers in alterations to existing facilities, where recessing the compartment to achieve a ½-inch...
-
4.27.3* Height
The highest operable part of controls, dispensers, receptacles, and other operable equipment shall be placed within at least one of the reach ranges specified in 4.2.5 and 4.2.6....
-
Urinals
Men’s toilet rooms with only one urinal will no longer be required to provide an accessible urinal under the 2010 Standards....
-
11B-213.3.4 Lavatories
Where lavatories are provided, at least 10 percent but no fewer than one shall comply with Section 11B-606 and shall not be located in a toilet compartment....
-
7(2)(b)(iv)
(iv) Toilets are located within bathrooms in a manner that permit a grab bar to be installed on one side of the fixture....