For stretchers with a shorter wheelbase than “standard,” the clearance for a lift may use both the clearance in the base and the clearance around the base to position the lift around the...
Search Results "Horizontal Position"
-
5.7.1.1 Lift Compatibility Clearance in Base for Stretchers (M301)
-
1002.5 Amusement Ride Seats Designed for Transfer
Amusement ride seats designed for transfer shall comply with 1002.5 when positioned for loading and unloading. Advisory 1002.5 Amusement Ride Seats Designed for Transfer....
-
Facility
A clear floor space complying with 305 positioned for a forward approach shall be provided....
-
604.2 Location
The water closet shall be positioned with a wall or partition to the rear and to one side....
-
604.5.2 Rear Wall
Where an administrative authority requires flush controls for flush valves to be located in a position that conflicts with the location of the rear grab bar, then the rear grab bar shall...
-
11B-405.7.5 Doorways
Doors, in any position, shall not reduce the minimum dimension of the ramp landing to less than 42 inches (1067 mm). [2010 ADAS] 405.7.5 Doorways. ...
-
4.4.4 Clear Floor or Ground Space
Shoulder alignment generally can be achieved by positioning the back of the bench so it is 8 inches (200 millimeters) closer to the outdoor recreation access route, trail, or beach access...
-
1014.2.1 Transfer Access
Where transfer access is provided, this section requires a clear ground space 36 inches minimum by 48 inches minimum positioned for a parallel approach to be provided at the entrance to...
-
11B-405.7.5 Doorways
Doors, in any position, shall not reduce the minimum dimension of the ramp landing to less than 42 inches (1067 mm). [2010 ADAS] 405.7.5 Doorways....
-
11B-1002.5 Amusement ride seats designed for transfer
Amusement ride seats designed for transfer shall comply with Section 11B-1002.5 when positioned for loading and unloading....
-
1134A.4 Sufficient maneuvering space
The clear maneuvering space shall allow the user to position a wheelchair or other mobility aid clear of the path of the door as it is closed and to permit use of fixtures....
-
11B-1002.5 Amusement ride seats designed for transfer
Amusement ride seats designed for transfer shall comply with Section 11B-1002.5 when positioned for loading and unloading....
-
1134A.4 Sufficient maneuvering space
The clear maneuvering space shall allow the user to position a wheelchair or other mobility aid clear of the path of the door as it is closed and to permit use of fixtures....
-
Measures and Procedures
The subjects were asked to position themselves next to the platform as they normally would to prepare for a transfer....
-
Taking Measurements
This is the “level” position. While the level is in this position, measure the distance between the end of the level and the sloped surface below....
-
Kitchen Appliances and Fixtures
food odors) Extra long “C” grips on appliances Espresso machine that makes steamed milk taste like cream Pop-up shelf usable from a wheelchair or from a standing position...
-
11B-604.8.1.1 Size
The minimum space required in toilet compartments is provided so that a person using a wheelchair can maneuver into position at the water closet....
-
Ticket Prices and Dispersal of Wheelchair Spaces
For high demand events the equivalent or better wheelchair seating positions that must be sold at the lower seating prices will likely sell out early to non-wheelchair users who claim to...
-
Gamco Swing Up Grab Bar - 125-Swing-Up
Detent holds bar in vertical position. Back Plate - 3/16" (4.5mm) thick, one piece stainless steel design....
-
Kompan, Inc. Solitaires Spinners Navigator ELE400007
The platform can be turned around and re-positioned, which is enjoyable for young sailors who like to control the direction of their journey....
-
DORMA BTS80 EMB Series Door Closer
The closer is typically placed into the hold open position until a fire alarm condition....
-
Bosch 3-Point Self-Leveling Alignment Laser GPL 3
Multi-purpose attachment positions the mount with magnets, strap or threaded mounts (5/8" to 11, 1/4" to 20)....
-
NFPA
unfinished attic or an exterior wall, smoke alarms and smoke detectors shall be mounted on an inside wall. 4) Smoke alarms or smoke detectors shall be installed a minimum of 20 feet horizontal...
