Section 604.8.2.3 covers the current ADA Standards for grab bars in ambulatory accessible compartments.
Search Results "Hinge Side Clearance"
-
Grab Bars: ADA Standard Section 604.8.2.3
-
What is best way to provide accessible curb-side EVCS (like parallel parking)?
RESPONSE: Though the building code does not regulate EVCS in the public right-of-way, accessibility is still required under the federal Americans with Disabilities Act. Since there...
-
Comparison of Single-User Toilet Room Layouts: 1A, 1B, and 1C
A lavatory with knee space can overlap the clear floor space required for the water closet provided that at least 36 inches of clearance is maintained between the side wall next to the water...
-
1015.2 Where required
vertically to the floor or grade below at any point within 36 inches (914 mm) horizontally to the edge of the open side....
-
Cubicles and Counters: ADA Standard Section 231.4.1
Section 231.4.1 covers scoping requirements in the current ADA Standards for cubicles and counters.
-
ACCESS AISLE
[DSA-AC] An accessible space adjacent to or between vehicle spaces that provides clearances in compliance with this code....
-
11B-306.1 General
Clearances are measured in relation to the usable clear floor space, not necessarily to the vertical support for an element....
-
11B-306.1 General
Clearances are measured in relation to the usable clear floor space, not necessarily to the vertical support for an element....
-
Location: ADA Standard Section 502.3.4
Section 502.3.4 covers the current ADA Standards for the required location of access aisles.
-
Q3.) What are the types of “manufacturing processes” that were anticipated where the advisory says “tolerances recognized by this provision include… “those that may be a necessary consequence of a particular manufacturing process”?
To simplify the tolerance assessment, the 2010 Standards specify that the shower compartment be measured at the center points of opposing sides but the expectation is that the width at the...
-
H29
If a coat hook is provided is it mounted no higher than 54 inches above the floor for a side approach or 48 inches above the floor for a front approach?...
-
4.3.9 Doorway Design
The lack of differences between the findings for the passage task on the pull sides of Doors 1, 800 mm (31.5 in.) latch clearance, and Door 2, 406 mm (16 in.) latch clearance, demonstrate...
-
11B-505.2 Where required
Handrails shall be provided on both sides of stairs and ramps....
-
11B-505.2 Where required
Handrails shall be provided on both sides of stairs and ramps....
-
11B-604.8.2.3 Grab bars
A side-wall grab bar complying with Section 11B-604.5.1 shall be provided on both sides of the compartment....
-
11B-604.8.2.3 Grab bars
A side-wall grab bar complying with Section 11B-604.5.1 shall be provided on both sides of the compartment....
-
Measuring Door Openings
To measure the clear opening of a standard hinged door, open the door to 90 degrees....
-
Cubicles and Counters: ADA Standard Section 232.5.1
Section 232.5.1 covers scoping requirements in the current ADA Standards for cubicles and counters.
- NYC Board of Elections: Video 3 - Accessibility Clerk Responsibilities
-
Door Swing: ADA Standard Section 603.2.3
Section 603.2.3 covers the current ADA Standards for door swings at clear floor space and clearances at fixtures in toilet and bathing rooms.
-
11B-809.2.2 Turning space
It is generally acceptable to use required clearances to provide wheelchair turning space....
-
11B-809.2.2 Turning space
It is generally acceptable to use required clearances to provide wheelchair turning space....
- ASI Global Partitions Phenolic Black Core Partition
-
Water Closet Location.
However, without research data upon which to determine how much space was adequate, side clearance varied, usually dependent on the amount of space available within the overall design of...
