Section 410.6 covers the current ADA Standards for the doors and gates of platform lifts.
Search Results "Hinge Side Clearance"
Filters
Commonly Searched Documents
-
Doors and Gates: ADA Standard Section 410.6
-
WORKSTATION
Examples include ticket booths; the employee side of grocery store check stands; the bartender area behind a bar; the employee side of snack bars, sales counters and public counters; guardhouses...
-
11B-705.1.2.2.1 Perpendicular curb ramps
Detectable warnings shall extend the full width of the ramp run less 2 inches (51 mm) maximum on each side, excluding any flared sides....
-
Bradley 1-Stall Seat Cover/Tissue Dispenser 5922
Model 5922, 5922-10, 5922-11, 5922-69 Model 5922 recessed (shown, clearance for grab bar) BradEX Model 5922-10 semi-recessed (recesses 2-3/4"; projects 1-1/2" - single...
-
Fixtures
Fixtures TAS 604.3.2 also allows the clear floor space and clearances required at other “fixtures” to overlap the water closet clearance....
-
1011.3 Operable Parts
Trash and recycling receptacles with hinged lids and controls to keep out large animals shall comply with 309.4 to the extent practicable. 3. ...
-
T502.4 Doorways with Steps on Over-the-Road Buses
Hinges and other door mechanisms shall be permitted to protrude 4 inches (100 mm) maximum into the door opening clear width at or below 48 inches (1220 mm) in height measured from the lowest...
-
1011.3 Operable Parts
Trash and recycling receptacles with hinged lids and controls to keep out large animals shall comply with 309.4 to the extent practicable. 3....
-
604.3.2 Overlap
routes, clear floor space and clearances required at other fixtures, and the turning space....
-
11B-604 Water closets and toilet compartments
routes, clear floor space and clearances required at other fixtures, and the turning space....
-
11B-608.5.3 Alternate roll-in type shower compartments
In alternate roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located on the side wall of the compartment adjacent to the 16 inches (406 mm) minimum...
-
Selecting a Kitchen Faucet: Faucet Function and Spray
A guide to selecting a kitchen faucet based on the faucet function an spray function including side sprays, professional-grade single-control faucets and more....
-
Feature 4 - Routes to the Meeting Space
Therefore, objects that do not provide sufficient head clearance or that are mounted too high and protrude into a route can become hazards because they cannot be detected by people who use...
-
PART 3: ACCESSIBLE EXAMINATION ROOMS
The features that make this possible are: an accessible route to and through the room; an entry door with adequate clear width, maneuvering clearance, and accessible hardware;...
-
R404 Clear Spaces (Section-by-Section Analysis)
Additional maneuvering space must be provided where an element is confined on all or part of three sides....
-
Landings: ADA Standard Section 406.4
Section 406.4 covers the current ADA Standards for curb ramp landings.
-
11B-410.6 Doors and gates
Side doors and gates shall provide a clear width 42 inches (1067 mm) minimum....
-
Lowered section for bar
Why can't this lowered section be hinged?...
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
Court Sports: ADA Standard Section 206.2.12
Section 206.2.12 covers scoping requirements in the most current ADA Standards for accessible routes to court sports.
-
Approach: ADA Standard Section 1002.4.6
One side of the wheelchair space shall adjoin an accessible route when in the load and unload position....
-
Car Controls: ADA Standard Section 408.4.6
Section 408.4.6 covers the current ADA Standards for the car controls in limited-use/limited-application elevators.
-
11B-1002.4.6 Approach
One side of the wheelchair space shall adjoin an accessible route when in the load and unload position....
-
11B-206.2.12 Court sports
In court sports, at least one accessible route shall directly connect both sides of the court....
