Some paired folding seats fold into a fixed center bar to allow one or two wheelchair spaces....
Search Results "Vertical Grab Bar"
Filters
Commonly Searched Documents
-
Companion Seating
-
11B-810.2.3 Connection
shall provide a detectable transition between the boarding/alighting area and the roadway; the detectable transition shall consist of a curb with the face sloped at 35 degrees maximum from vertical...
-
Handrail Extensions
Other specifications regarding vertical supports are not addressed by ADDAG, but may be addressed in local building codes....
-
303.3 Beveled
A change in level of 1/2 inch (13 mm) is permitted to be 1/4 inch (6.4 mm) vertical plus 1/4 inch (6.4 mm) beveled....
-
704.2 Projections
extend beyond the distance determined by the following two methods, whichever results in the lesser projection: A point one-third the distance to the property line from an assumed vertical...
-
405.9 Edge Protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of ½ inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area...
-
Tread Obstacles on Trails
Height of tread obstacles must be measured vertically from the trail tread surface to the highest point of the obstacle....
-
Scoping [4.1.3(4)]
Stairs do not have to comply where vertical access (ramp, elevator, or lift) is provided....
-
Locating Controls & Devices: Percent of People Who Can Reach the Matrix Cell Indicated While Holding 5 lb Weight - Side Approach Power Chair
represented as the percentage of users able to retrieve and place a 5 lb object on a target shelf in the lateral or sideways reach direction for a given (a) height from the floor (shown the vertical...
-
Locating Controls & Devices: Percent of People Who Can Reach the Matrix Cell Indicated While Holding 5 lb Weight - Side Approach Scooter
represented as the percentage of users able to retrieve and place a 5 lb object on a target shelf in the lateral or sideways reach direction for a given (a) height from the floor (shown the vertical...
-
Locating Controls & Devices: Percent of People Who Can Reach the Matrix Cell Indicated While Holding 5 lb Weight - Side Approach Manual Wheelchair
represented as the percentage of users able to retrieve and place a 5 lb object on a target shelf in the lateral or sideways reach direction for a given (a) height from the floor (shown the vertical...
-
§ 38.159(b)(7) Platform gaps
the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and the vehicle floor shall not exceed 1/2 inch (13 mm) horizontally and 5/8 inch (16 mm) vertically...
-
11B-810.2.3 Connection
shall provide a detectable transition between the boarding/alighting area and the roadway; the detectable transition shall consist of a curb with the face sloped at 35 degrees maximum from vertical...
-
11B-810.2.3 Connection
shall provide a detectable transition between the boarding/alighting area and the roadway; the detectable transition shall consist of a curb with the face sloped at 35 degrees maximum from vertical...
-
11B-410.8 Restriction sign
For lifts with a signed installation contract before May 1, 2008: CCR, Title 8, Section 3094 provides safety regulations for Vertical Platform (Wheelchair) Lifts. ...
-
Sloped Surfaces
The amount of slope or grade is described as the proportion of a vertical rise to a horizontal length....
-
Running Slope [1017.7.1]
Running slope is often described as a ratio of vertical distance to horizontal distance, or rise to run (figure 9)....
-
Notes
., with a fixed vertical distance between the seat and footplate)....
-
810.5.3 Platform and Vehicle Floor Coordination
commuter rail, and intercity rail systems subject to Department of Transportation regulation 49 CFR 37.21 where it is not operationally or structurally feasible to meet the horizontal gap or vertical...
-
11B-410.8 Restriction sign
For lifts with a signed installation contract before May 1, 2008: CCR, Title 8, Section 3094 provides safety regulations for Vertical Platform (Wheelchair) Lifts....
-
Bobrick ClassicSeries Surface-Mounted Soap Dispenser B-2111
Vertical tank is satin-finish stainless steel. Valve dispenses all-purpose hand soaps. Capacity: 40‑fl oz (1.2‑L). Soap refill window. Concealed wall fastening....
-
Bobrick TrimLineSeries ADA Surface-Mounted Hand Dryer B-7128.230V
Durable, 22-gauge galvanized steel with exposed surface, type 304 satin-finish stainless steel cover having #4 satin-finish vertical grain with black plastic trim, automatic sensor, dual...
-
Pilot Rock FSWDW-30 Campfire Ring
The cooking and fire grates are fabricated using 5/8" dia. perimeter and handle bars with coiled steel bar grips, and 1/2" dia. grate bars. All grate bars are welded on both sides. ...
-
Aluminum Heavy Duty Wheels n' Heels® InVent Grating
The major difference with the InVent style is that the main support bearing bars are hidden under the top surface bars and run in the direction perpendicular to the top surface bars....
