Mirrors shall be mounted with the bottom edge of the reflecting surface no higher than 40 in (1015 mm) from the floor (see Fig. 31)....
Search Results "Reflecting Surface"
-
4.19.6* MIRRORS
-
Play Areas
Word Fillable Form (0.4MB) Word Non-Fillable Form (0.3MB) PDF Non-Fillable Form (0.3MB)
-
4.19.6* Mirrors
Mirrors shall be mounted with the bottom edge of the reflecting surface no higher than 40 in (1015 mm) above the finish floor (see Fig. 31)....
-
603.3 Mirrors
Mirrors located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface 40 inches (1015 mm) maximum above the finish floor or ground....
-
603.3 Mirrors
Mirrors located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface 40 inches (1015 mm) maximum above the finish floor or ground....
-
11B-603.3 Mirrors
Mirrors located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface 40 inches (1016 mm) maximum above the finish floor or ground....
-
603.3 Mirrors
Mirrors located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface 40 inches (1015 mm) maximum above the finish floor or ground....
-
603.3 Mirrors
Mirrors located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface 40 inches (1015 mm) maximum above the finish floor or ground....
-
11B-603.3 Mirrors
Mirrors located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface 40 inches (1016 mm) maximum above the finish floor or ground....
-
25. Please indicate the date (year) of trail surface installation
Please indicate the date (year) of trail surface installation:...
-
M12
If a mirror is provided, is the bottom of the reflecting surface no higher than 40 inches above the floor or is a full length mirror provided?...
-
11B-603.3 Mirrors
Mirrors located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface 40 inches (1016 mm) maximum above the finish floor or ground....
-
H11
If mirrors are provided, is the bottom of the reflecting surface for the mirror at this lavatory no higher than 40 inches above the floor or is a full length mirror provided?...
-
What values are recommended for ground and floor surfaces along an accessible route?
What values are recommended for ground and floor surfaces along an accessible route?...
-
II. Recommendations of Diagnostic Imaging Equipment Manufacturers on Transfer Surface Low Height
Recommendations of Diagnostic Imaging Equipment Manufacturers on Transfer Surface Low Height The aforementioned medical diagnostic imaging equipment manufacturers support a 19 inch minimum...
-
AJW Architectural Products U704 Series 16"W x 30"H Fixed Tilt Angle Frame Mirror - Plate Glass Surface
Product Features Fabricated of #18 gauge stainless steel with #4 satin finish Frame extends 4" at the top and tapers to 1" at bottom Multiple reflective surfaces available Mirror...
-
Durability and Maintenance of Detectable Warning Surfaces (Section-by-Section Analysis)
Durability and Maintenance of Detectable Warning Surfaces (Section-by-Section Analysis) Transportation officials who commented on the 2002 draft guidelines expressed concern about the...
-
Mirrors
Provide a mirror in the Spy City Café men's and women's toilet rooms where the bottom edge of the reflecting surface of the mirror is mounted no more than 40" above the finished floor....
-
FACTS APPLICABLE TO ALL CLAIMS
FACTS APPLICABLE TO ALL CLAIMS 24. As a result of Defendant's policies and practices with regard to curb ramps in the City's pedestrian right of way, people with mobility...
-
Forms + Surfaces Summit Bike Rack
Bodies of stainless steel tubing Surface mount option has a cast aluminum base that conceals a ¼" stainless steel mounting plate Bodies have a Satin finish; base castings have a durable...
-
Sales Counters
Some comments reflected a misunderstanding that this section also applied to sales counters and other elements that are addressed in section 227 (Sales and Service). Response....
-
34. Please indicate the condition of the trail’s surface characteristics within the last quarter
Please indicate the condition of the trail’s surface characteristics within the last quarter (choose all that apply): Trail’s Surface Characteristics Choose all that apply...
-
Mary Ann Hay, IALD, LEED AP, Vice President, Director, Architectural Lighting Design, Syska Hennessy Group, Inc.
Light reflecting from highly reflective surfaces. Windows. Skylights....
-
32. Please indicate the condition of the trail’s surface characteristics over a period of time
Please indicate the condition of the trail’s surface characteristics over a period of time (choose all that apply): Trail’s Surface characteristics Monthly Quarterly...
