The PRO1000's fixed arm cranks, accessibility and low starting resistance make it easy to get on and get going....
Search Results "Fixed Assembly Seating"
Commonly Searched Documents
- SciFit PRO1000 Sport - Seated Upper Body Machine
-
M305.2.2 Length
The length of transfer supports shall comply with M305.2.2.1 or M305.2.2.2.
-
219.3 Receivers
shall be permitted to be calculated according to the total number of seats in the assembly areas in the building provided that all receivers are usable with all systems. 2....
- American Specialties Fixed Angle Tilt Mirror
-
11B-233.3.1.2.6.5 Additional requirements.
Water closet seat height complying with Section 11B-809.10.7.4. 7. Electrical receptacles, switches and controls complying with Section 11B-809.12. 8....
- Kohler C3® 200 Elongated Bidet Toilet Seat With In-line Heater and Remote Control Video
-
12. Seating, tables, or work surfaces
Seating, tables, or work surfaces 4.30 If provided in accessible spaces, at least one of each type provided....
-
T213.3 Armrests at Aisle Seats on Over-the-Road Buses
Where armrests are provided on the aisle side of seats on over-the-road buses, folding or removable armrests shall be provided on the aisle side of at least 50 percent of aisle seats....
-
219.3 Receivers
shall be permitted to be calculated according to the total number of seats in the assembly areas in the building provided that all receivers are usable with all systems. 2....
- GameTime Adaptive Swing Seat
- Pilot Rock T300/T400 Series Round, Pedestal Table With CURVED Seats - Using Recycled Plastic
-
Identification of available accessible seating. (Section-by-Section Analysis)
Section 36.302(f)(3) of the proposed rule requires a facility to identify available accessible seating. ...
-
M305.2.8 Fittings
Transfer supports shall not rotate within their fittings when in place for transfer.
-
M305.2.7 Clearance
Clearance between the transfer support gripping surface and adjacent surfaces or obstructions shall be 1 ½ inches (38 mm) minimum.
-
M305.2.7 Clearance (Section-by-Section Analysis)
In the MDE NPRM, the Access Board did not provide any specific requirements for clearances around the transfer support. However, in the preamble to the MDE NPRM the Access Board...
-
5.4.10 Transfer Support Fittings Recommendations for M301 and M302
5.4.10 Transfer Support Fittings Recommendations for M301 and M302 Description: To ensure safe and effective transfers, transfer supports must not rotate within their fittings...
-
Height – M301.2.1 & M302.2.1
Height – M301.2.1 & M302.2.1 The subcommittee discussed the increments for adjustability and decided that infinite adjustability is the appropriate standard as both electronic...
-
M305.2.3 Fittings
Transfer supports shall not rotate within their fittings.
-
F219.3 Receivers
shall be permitted to be calculated according to the total number of seats in the assembly areas in the building provided that all receivers are usable with all systems. 2. ...
-
44. Can an employer deny a request for leave when an employee cannot provide a fixed date of return?
Providing leave to an employee who is unable to provide a fixed date of return is a form of reasonable accommodation....
-
11B-219.3 Receivers
shall be permitted to be calculated according to the total number of seats in the assembly areas in the building provided that all receivers are usable with all systems. 2. ...
-
11B-219.3 Receivers
shall be permitted to be calculated according to the total number of seats in the assembly areas in the building provided that all receivers are usable with all systems. 2. ...
- Integralift Fixed Ceiling Lift Short Instructional Video
- Pilot Rock T300/T400 Series Round, Pedestal Table With CURVED Seats - Using Cut Steel Plate