The level of illumination at the car controls, platform, car threshold and car landing sill shall be 5 foot candles (54 lux) minimum....
Search Results "Car Lift"
-
11B-407.4.5 Illumination
-
11B-407.4.5 Illumination
The level of illumination at the car controls, platform, car threshold and car landing sill shall be 5 foot candles (54 lux) minimum....
-
105.2.2 ASME
The building location, the elevator car number, and the need for assistance must be provided to authorized personnel answering the emergency call....
-
105.2.2 ASME
The building location, the elevator car number, and the need for assistance must be provided to authorized personnel answering the emergency call....
-
ASME
The building location, the elevator car number, and the need for assistance must be provided to authorized personnel answering the emergency call....
-
Section 810.5.3
or platform-mounted lifts, ramps or bridge plates or similarly manually deployed devices, meeting the requirements of 49 CFR Part 38 shall be permitted.”...
- Symmetry Limited Use/Limited Application (LU/LA) Elevator
-
Parking Spaces [4.6.3]
For vans with side-mounted lifts, a combined width of almost 17 feet is often needed for the deployment and use of side-mounted lifts; ADAAG requires at least 16 feet....
-
[2010 ADAS] 105.2.2 ASME
The building location, the elevator car number, and the need for assistance must be provided to authorized personnel answering the emergency call....
-
§ 38.83(a)(2) Exception
If lifts, ramps or bridge plates meeting the requirements of this section are provided on station platforms or other stops required to be accessible, or mini-high platforms complying with...
-
Changes in Level and Horizontal Gaps
The referenced vehicle guidelines (like those of the proposed rule) permit the use of mini high platforms, car-borne or platform-mounted lifts, ramps or bridge plates, or manually deployed...
-
Attachment J
Provide and maintain a two-way communication system such that it does not require voice communication, the highest operable part is a maximum of 48 inches above the finished floor of the car...
-
§ 38.175 High-speed rail cars, monorails and systems
[See subsections ...]
-
[2010 ADAS] 105.2.2 ASME
The building location, the elevator car number, and the need for assistance must be provided to authorized personnel answering the emergency call....
-
10.3.2(4)
/2 inches under all normal passenger load conditions, and the horizontal gap, measured when the vehicle is at rest, is no greater than 3 inches for at least one door of each vehicle or car...
-
11B-411.4.11.3 Duration
Floor destination characters shall be displayed upon elevator car arrival at the input floor and shall not extinguish until the elevator car arrives at the destination floor....
-
11B-411.4.11.3 Duration
Floor destination characters shall be displayed upon elevator car arrival at the input floor and shall not extinguish until the elevator car arrives at the destination floor....
-
Platform and Vehicle Floor Coordination: ADA Standard Section 810.5.3
rail systems where it is not operationally or structurally feasible to meet the horizontal gap or vertical difference requirements of part 1192 or 49 CFR part 38, mini-high platforms, car-borne...
-
NPRM
NPRM proposed that, at new or altered platforms in intercity and commuter rail stations, rail operators would have to ensure that passengers with disabilities would be able to board any car...
-
Passenger Elevators
The technical criteria for LULA elevators specify minimum car sizes that ensure adequate accessibility....
-
Leveling: ADA Standard Section 407.4.4
Section 407.4.4 covers the current ADA Standards for the self-leveling feature in elevator cars.
-
11B-407.4.4 Leveling
Each car shall be equipped with a self-leveling feature that will automatically bring and maintain the car at floor landings within a tolerance of ½ inch (12.7 mm) under rated loading to...
-
11B-407.4.4 Leveling
Each car shall be equipped with a self-leveling feature that will automatically bring and maintain the car at floor landings within a tolerance of ½ inch (12.7 mm) under rated loading to...