are not HVAC “only” projects and, in addition to compliance with CBC Section 11B-309, are subject to the accessible path of travel improvements required by CBC Section 11B-202.4. 1.3 Design...
Search Results "Seat Designation"
Commonly Searched Documents
-
DSA IR 11B-6 ACCESSIBILITY REVIEW OF MECHANICAL (HVAC) PROJECTS (revised 05/27/2021)
-
Prevention of Fraud in Purchase of Tickets for Accessible Seating
ticket holder to move to a different, non-accessible seating location....
-
5.4.5 Transfer Support Position Recommendation for M301 and M302
It addresses angled supports or contoured portions of horizontal supports often provided for ergonomics or equipment design considerations....
-
Plan 3A: 12-Foot Wide Accessible Guest Room
Features include a bathtub with a seat, comparable vanity, open clothes closet, and door connecting to adjacent guest room....
-
Plan 1A: 13-Foot Wide Accessible Guest Room
Features include a standard bathtub with a seat, comparable vanity, clothes closet with swinging doors, and door connecting to adjacent guest room....
- Signaids Men's Washroom Sign
-
Design Speed
The selected design speed of a facility affects many aspects of geometric design....
-
17 Inch Low Height
The safest and most easily accessible transfers are those with no or very little horizontal and vertical distance between the seat of the wheelchair and the transfer surface....
-
Designations and Indicators of Car Controls: ADA Standard Section 407.4.7
Section 407.4.7 covers the current ADA Standards for designations and indicators of elevator car controls.
-
§ 38.125(d) Seating
(d) Seating—...
-
5.1.4 Transfer Surface Height Measurement
The transfer surface height should be measured from the floor to the highest point on the seat in an uncompressed state, inclusive of bolsters....
-
Chapter 3: Study findings
[See subsections ...]
-
4.34.5.4 BATHTUBS
If a bathtub is provided, then it shall have the following features:
-
Section 36.308 Seating in Assembly Areas (Section-by-Section Analysis)
Sections 36.308(a)(1) and (b) have been revised to include an express requirement to provide companion seats and designated aisle seats....
-
Design Specifications
Design Specifications...
- Social Security Administration (SSA) Guide: Alternate text for images
-
221.2.1.1 General Seating
221.2.1.1 General Seating. Wheelchair spaces complying with 802.1 shall be provided in accordance with Table 221.2.1.1....
-
AMUSEMENT RIDE SEAT
[DSA-AC] A seat that is built-in or mechanically fastened to an amusement ride intended to be occupied by one or more passengers....
-
AMUSEMENT RIDE SEAT
[DSA-AC] A seat that is built-in or mechanically fastened to an amusement ride intended to be occupied by one or more passengers....
-
5.4.7 Transfer Support Gripping Surface Clearance Recommendation for M301 and M302
gripping surface would be appropriate for transfer supports on diagnostic equipment used by patients in a supine, prone, or side-lying position, and diagnostic equipment used by patients in a seated...
-
4. Wheelchair seat depth
Wheelchair seat depth For this study, wheelchair seat depth was calculated as the horizontal distance from the proximal (i.e., towards the rear) edge to the distal (i.e., towards the...
-
7. Seat Transfer
Are the roll-in showers free of doors that would impede wheelchair transfer onto the seat? [ADA Stds. 4.21.8] Yes __ No __ N/A __ Comments: _______________________________________...
-
5.4.4 Transfer Support Distance from Transfer Surface Recommendations for M301 and M302
appropriate for the location and size of transfer supports on diagnostic equipment used by patients in a supine, prone or side-lying position, and diagnostic equipment used by patients in a seated...
-
5.4.10 Transfer Support Fittings Recommendations for M301 and M302
To be useful, transfer supports will be of varying configuration and designs. Some may be removable, some foldable or articulating....