apply epoxyProduct can be applied to wood, aluminum, concrete, metal, etc Excellent abrasion resistance Chemical, solvent and water resistant Great for any application where a clear...
Search Results "Clear Opening"
Commonly Searched Documents
- Walk-A-Sured Clear Anti-Slip Safety Coating System
-
Guidelines for Requirement 4
Second, the Department has eliminated the specification for a minimum clear headroom of 80 inches....
-
4.34.5.4 BATHTUBS
If a bathtub is provided, then it shall have the following features:
-
224 Transient Lodging Guest Rooms
In guest rooms having more than 25 beds, 5 percent minimum of the beds shall have clear floor space complying with 806.2.3....
-
4.22.3 CLEAR FLOOR SPACE
The clear floor space at fixtures and controls, the accessible route, and the turning space may overlap....
-
Section 36.303 Auxiliary Aids and Services (Section-by-Section Analysis)
Section 36.303 Auxiliary Aids and Services Section 36.303(a) of the 1991 title III regulation requires a public accommodation to take such steps as may be necessary to ensure that...
-
§ 36.303 Auxiliary aids and services.
[See subsections ...]
- BEA Inc. Magic Switch Hardwired Touchless Sensor Door Opener MS21H (Wave to Open)
- Open Future Learning
-
28.1 Q. If an architect or builder chooses to follow the bathroom specifications in Requirement 7...are the other bathrooms in the dwelling unit required to have reinforced walls for grab bars?
A. Yes. Requirement 6 of the Guidelines requires reinforced walls in bathrooms for later installation of grab bars. Even though Requirement 6 was not repeated under Requirement...
-
Plan 1A: 13-Foot Wide Accessible Guest Room
(section 607.2); • Recessed bathtub location permits shorter rear grab bar at water closet (section 604.5.2); • Circular turning space in room (section 603.2.1); • Required clear...
-
Plan 1B: 13-Foot Wide Accessible Guest Room
(section 607.2); • Recessed bathtub location permits shorter rear grab bar at water closet (section 604.5.2); • Circular turning space in room (section 603.2.1); • Required clear...
- Wikk Industries Inc. PART# BPS IG HL/LO CLEAR (628)
-
Clear floor space
Please provide a plan indicating locations of clear floor space to the side and front of bench as called for in 903.2....
-
Re: How to Use the Pressure Gauge Tool
WARNING - We have stopped carrying the HMC International spring-type door pressure gauges shown in the video because the last two large shipments we received were all exactly one...
-
Requirement 4. Accessible route into and through the covered dwelling unit.
Section 100.205(c)(3)(i) provides that all covered multifamily dwellings with a building entrance on an accessible route shall be designed and constructed in such a manner that all...
-
7(2)(b)(iv)
(iv) Toilets are located within bathrooms in a manner that permit a grab bar to be installed on one side of the fixture. In locations where toilets are adjacent to walls or bathtubs,...
-
Requirement 4 -- Accessible Route Into and Through the Unit
[See subsections ...]
- Wikk Industries Inc. PART# BPS SM-HL/LO CLEAR (628)
-
1133A.2.1 Clear width
Kitchens shall have a minimum clear width measured between any cabinet, countertop or the face of any appliance (excluding handles and controls) that projects into the kitchen and the opposing...
-
1133A.2.1 Clear width
Kitchens shall have a minimum clear width measured between any cabinet, countertop or the face of any appliance (excluding handles and controls) that projects into the kitchen and the opposing...