The 1991 Standards and the 2010 Standards apply to fixed or built-in elements of buildings, structures, site improvements, and pedestrian routes or vehicular ways located on a site....
Search Results "Built-In Seating"
-
§ 36.406(b) Scope of coverage.
-
5b.
Floor dimensions of at least 48 inches by 48 inches may be allowed in existing facilities built before the ADA went into effect....
-
[A] 101.3 Intent
strength, means of egress facilities, stability, sanitation, adequate light and ventilation, energy conservation, and safety to life and property from fire and other hazards attributed to the built...
- Pilot Rock UT Series Side Accessible Picnic Table Using Recycled Plastic
- M-Dura Modern Suite | Moen Features Spotlight
- Panda TS.87 Lift & Slide Slim Profile Thermally Broken Corner Sample
- Panda TS.87 Thermally Broken Slim Profile Lift & Slide System
-
10) Assembly areas
10) Assembly areas ADAAG: * Wheelchair seating: Requirements triggered in any assembly area with fixed seating that seats four or more people....
-
A4.33.3 Placement of Wheelchair Locations
Building/life safety codes set minimum distances between rows of fixed seats with consideration of the number of seats in a row, the exit aisle width and arrangement, and the location of...
- University of Michigan Transportation Research Institute
-
221 Assembly Areas
seating (221.5)....
-
11B-306.3.3 Minimum required depth
the finish floor or ground at a depth of 8 inches (203 mm) minimum increasing to 29 inches (737 mm) high minimum above the finish floor or ground at the front edge of a counter with a built-in...
-
11B-306.3.3 Minimum required depth
the finish floor or ground at a depth of 8 inches (203 mm) minimum increasing to 29 inches (737 mm) high minimum above the finish floor or ground at the front edge of a counter with a built-in...
- Pilot Rock UT Series Side Accessible Picnic Table Using Aluminum
- Pilot Rock WUT and WUTH Picnic Table - Using Aluminum
-
Ticket Transfers and Secondary Ticket Market
Venues cannot require that accessible seats only be transferred to someone with a disability....
-
[A] 101.3 Intent
strength, means of egress facilities, stability, sanitation, adequate light and ventilation, energy conservation, and safety to life and property from fire and other hazards attributed to the built...
-
3. Element by Element Safe Harbor
The rule includes a general "safe harbor" under which elements in covered facilities that were built or altered in compliance with the 1991 Standards or the UFAS would not be required to...
-
11B-306.3.4 Clearance reduction
Exception: The knee clearance shall not be reduced at built-in dining and work surfaces required to be accessible by Section 11B-226.1....
-
11B-306.3.4 Clearance reduction
Exception: The knee clearance shall not be reduced at built-in dining and work surfaces required to be accessible by Section 11B-226.1. ...
-
11B-306.3.4 Clearance reduction
Exception: The knee clearance shall not be reduced at built-in dining and work surfaces required to be accessible by Section 11B-226.1....
-
Wheelchair Storage Space: ADA Standard Section 1002.5.4
Wheelchair storage spaces complying with 305 shall be provided in or adjacent to unload areas for each required amusement ride seat designed for transfer and shall not overlap any required...
-
221.2.3.2 Vertical Dispersion
or other movable structures in an area where fixed seating is not provided, in order to increase seating for an event, wheelchair spaces and companion seats may be placed in that section...
-
E.
In Cinemark's auditoria with more than 300 seats, patrons may use elevators to access some of these seats on risers....