457 mm) of the latch side at an interior doorway, or within 24 inches (610 mm) of the latch side of an exterior doorway, projects more than 8 inches (203 mm) beyond the face of the door, measured...
Search Results "Unit of Measurement"
Filters
Commonly Searched Documents
-
11B-404.2.4.3 Recessed doors and gates
-
Are multi-unit dwellings of any kind covered under the requirements? Our thinking stemmed from the fact that it covers public housing, but how is public housing defined? For example, is section 8 housing applicable? Are all condos and apartments applicable if they are providing charging for any of their residents and not just a specific resident?
owned, operated, or constructed by, for or on behalf of a public entity including but not limited to the following: Publically owned and/or operated one- or two-family dwelling units...
-
11B-217.2 Wheelchair accessible telephones
NUMBER OF TELEPHONES PROVIDED ON A FLOOR, LEVEL, OR EXTERIOR SITE MINIMUM NUMBER OF REQUIRED WHEELCHAIR ACCESSIBLE TELEPHONES 1 or more single units...
-
Seeger et al.
Both unoccupied and occupied dimensions of device width and length were measured as well as a set of other basic dimensions....
-
Just Manufacturing Classroom Concealed Ledgemount Teardrop Handle Faucet
Classroom faucets feature rigid spouts, or restricted swing spouts, providing preventative measures against wet counter tops in the classroom....
-
Just Manufacturing Concealed Classroom Faucet with Triple Radius Spout
Brass quarter turn stem units....
-
Character Height: ADA Standard Section 703.2.5
Character height measured vertically from the baseline of the character shall be 5/8 inch (16 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter “I”....
-
Three: Is the limitation on any major life activity substantial?
How do mitigating measures, such as eyeglasses and blood pressure medication, impact the impairment?...
-
1.2.7
1.2.7 When local variations (flatness) for cross slope of ramps are measured according to 1.1.14 at least 80% (rounded to the nearest whole number) should not exceed a 2% slope....
-
Executive Summary
Over two million people in the United States use a wheelchair for mobility....
-
Original research for ANSI A117.1 (1957 - 1961)
1961, American National Standard Specifications for Making Buildings and Facilities Accessible to, and Usable by, the Physically Handicapped, ramps were assessed for flatness based on measuring...
-
3.3.5 Seat Height
The reference points used for measurement can yield quite different results for seat height....
-
APPENDIXES
X1.1.2 PRI precision depends on the interval between adjacent profile elevation measures....
-
C. Training
, including: (a) why such measures are necessary; (b) how the measures must be implemented (e.g., how to install ramps, the placement of mats over (and not in front of) thresholds); and...
-
11B-703.2.5 Character height
Character height measured vertically from the baseline of the character shall be 5/8 inch (15.9 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter “I”....
-
3. Q: I know I can't give a job applicant a medical exam before a conditional job offer is made. But what about physical agility and physical fitness tests?
A: You can give job applicants tests measuring an applicant's ability to perform job-related tasks or physical fitness tests (tests measuring performance of running, lifting, etc.) before...
-
C. Training
, including: (a) why such measures are necessary; (b) how the measures must be implemented (e.g., how to install ramps, the placement of mats over (and not in front of) thresholds); and...
-
810.2.2 Dimensions
Bus stop boarding and alighting areas shall provide a clear length of 96 inches (2440 mm) minimum, measured perpendicular to the curb or vehicle roadway edge, and a clear width of 60 inches...
-
11B-903.4 Back support
Back support shall be 2½ inches (64 mm) maximum from the rear edge of the seat measured horizontally. [2010 ADA Standards] 903.4 Back Support....
-
LRV Guru App - Demo #1
Just enter the LRV values if you know them -- or -- use a NODE+Chroma hand-held colorimeter to measure for LRV....
-
VOLUNTARY COMPLIANCE AGREEMENT BETWEEN THE UNITED STATES OF AMERICA AND THE TOWN OF LEWISBORO, NEW YORK
[See subsections ...]
-
Step Hear Call Hear CH-100
Video demonstrates a call and assist system comprised of a wireless call button and a chime alert unit located near an employee....
-
IDEA Center
and measurements of maneuvering clearances....
-
604.3.1 Size
Clearance around a water closet shall be 60 inches (1525 mm) minimum measured perpendicular from the side wall and 56 inches (1420 mm) minimum measured perpendicular from the rear wall....
