3. Measuring Door Openings Special care is needed when measuring the clear opening of a doorway. To measure the clear opening of a standard hinged door, open the door to 90...
Search Results "Transfer Technique"
Commonly Searched Documents
- 
    
  
  3. Measuring Door Openings
  
 - 
    
  
  F - number system
  
F - number system The F - number system, ASTM E 1155, Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers, was developed primarily to aid in the...
 - 
    
  
  a. Transfer Surface Adjustability
  
be the low transfer height....
 - 
    
  
  Two Step Transfers Attainable Heights
  
Among the participants that were able to complete the two step transfers, the 5th percentile were able to transfer to a second platform that was 3 inches higher than the first platform for...
 - 
    
  
  TRANSFER STALLS
  
[See subsections ...]
 - 
    
  
  Effect of Handhelds on Transfer Height
  
Only a few people used the backrests during the transfers....
 - 
    
  
  11B-1002.6.2 Transfer height
  
The height of transfer device seats shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
 - 
    
  
  11B-1002.6.2 Transfer height
  
The height of transfer device seats shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
 - 
    
  
  1009.5.4 Transfer Steps
  
1009.5.4 Transfer Steps. Transfer step height shall be 8 inches (205 mm) maximum....
 - 
    
  
  1002.5.3 Transfer Entry
  
1002.5.3 Transfer Entry....
 - 
    
  
  M302.2.4 Transfer Sides
  
Options to transfer from a mobility device shall be provided on two adjoining sides of transfer surfaces. ...
 - 
    
  
  M302.2.3 Transfer Sides
  
The transfer surface shall be located to provide options to transfer from a mobility device onto one short side (depth) and one long side (width) of the surface....
 - 
    
  
  1009.5.4 Transfer Steps
  
Transfer step height shall be 8 inches (205 mm) maximum....
 - 
    
  
  M301.2.3 Transfer Sides
  
M301.2.3 Transfer Sides Proposed requirement: The transfer surface shall be located to provide options to transfer from a mobility device onto one short side (depth) and one long side...
 - 
    
  
  11B-812.1 General
  
Electric vehicle charging stations (EVCS) shall comply with Section 11B-812 as required by Section 11B-228.3. Where vehicle spaces and access aisles are marked with lines,...
 - 
    
  
  Wall Depth and Length: ADA Standard Section 1009.4.3
  
The depth of the transfer wall shall be 12 inches (305 mm) minimum and 16 inches (405 mm) maximum....
 - 
    
  
  11B-1009.4.3 Wall depth and length
  
The depth of the transfer wall shall be 12 inches (305 mm) minimum and 16 inches (406 mm) maximum....
 - 
    
  
  Side Transfer Surface
  
A transfer surface located within the length of the examination surface that allows patient transfer on two opposing sides of the examination surface....
 - 
    
  
  Seat Heights
  
Seat Heights: Transfer platforms in play areas need to be between 11 and 18 inches maximum above the ground (ADA-ABA Section 1008.3.1.2)[7]....
 - 
    
  
  End Transfer Surface
  
A transfer surface located at one end of an examination surface that allows patient transfer at the end and one adjoining side of the examination surface....
 - 
    
  
  1009.5.4 Transfer Steps
  
Transfer step height shall be 8 inches (205 mm) maximum....
 - 
    
  
  1002.5.3 Transfer Entry
  
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
 - 
    
  
  1002.5.3 Transfer Entry
  
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
 - 
    
  
  Wheelchair Space or Transfer Seat or Transfer Device
  
Wheelchair Space or Transfer Seat or Transfer Device....