[See subsections ...]
Search Results "Transfer Technique"
-
Taking Measurements
-
2. Using the Tape Measure
2. Using the Tape Measure A metal tape measure is needed to measure the length, width, height, and depth of various elements. When measuring long distances, pull the tape tight to...
-
Take Good Measurements
Take Good Measurements When in doubt write it down. It’s better to have too much information than not enough. Even if something is in compliance it’s helpful to have exact...
-
Unified Facilities Guide Specifications
Unified Facilities Guide Specifications In Section 02752, Portland Cement Concrete Pavement for Roads and Site Facilities, published by the National Institute of Building...
-
2.3.1
2.3.1 Define the measurement protocols to be used to check for compliance with the tolerances and standards. This may include where measurements are made, how many should be made,...
-
Common Questions (Protruding Objects)
Common Questions
-
Suggestions by Jean Tessmer
Suggestions by Jean Tessmer As published in Concrete Technology Today, April 2001, Jean Tessmer, accessibility consultant for Space Options, suggested that ramp slopes be measured...
-
Location Above Detectable Elements
Objects located above elements that are within can sweep can protrude 4” maximum from the leading edge of such elements provided that any required reach or clear floor space is not...
-
Transfer Device
Equipment designed to facilitate the transfer of a person from a wheelchair or other mobility aid to and from an amusement ride seat....
-
1008.3 Transfer Systems
Where transfer systems are provided to connect to elevated play components, transfer systems shall comply with 1008.3. Advisory 1008.3 Transfer Systems....
-
1008.3 Transfer Systems
Where transfer systems are provided to connect to elevated play components, transfer systems shall comply with 1008.3. Advisory 1008.3 Transfer Systems....
-
TRANSFER DEVICE
[DSA-AC] Equipment designed to facilitate the transfer of a person from a wheelchair or other mobility aid to and from an amusement ride seat....
-
TRANSFER DEVICE
[DSA-AC] Equipment designed to facilitate the transfer of a person from a wheelchair or other mobility aid to and from an amusement ride seat....
-
Error/Omission: When a transfer shower is used, it is often larger than the required 36" x 36" size.
Error/Omission: When a transfer shower is used, it is often larger than the required 36" x 36" size....
-
608.2.1 Transfer Type Shower Compartments
608.2.1 Transfer Type Shower Compartments....
-
M302.2.4 Transfer Sides (Section-by-Section Analysis)
In the MDE NPRM, the transfer side provision for diagnostic equipment used by patients in the seated position required transfer surfaces to have the option to transfer from a mobility device...
-
Seat Width Evaluation
regardless of the presence or absence of grab bars or a backrest on the transfer surfaces. ...
-
When Transfer Systems Are Used
When Transfer Systems Are Used A transfer system provides access to elevated play components within a composite system by connecting different levels with transfer platforms and steps...
-
11B-1008.3 Transfer systems
Where transfer systems are provided to connect to elevated play components, transfer systems shall comply with Section 11B-1008.3. [2010 ADAS] Advisory 1008.3 Transfer Systems. ...
-
11B-1008.3 Transfer systems
Where transfer systems are provided to connect to elevated play components, transfer systems shall comply with Section 11B-1008.3. [2010 ADAS] Advisory 1008.3 Transfer Systems....
-
11B-1008.3 Transfer systems
Where transfer systems are provided to connect to elevated play components, transfer systems shall comply with Section 11B-1008.3. Advisory 11B-1008.3 Transfer systems....
-
608.2.1 Transfer Type Shower Compartments
Transfer type shower compartments shall be 36 inches (915 mm) by 36 inches (915 mm) clear inside dimensions measured at the center points of opposing sides and shall have a 36 inch (915...
-
Medical Diagnostic Equipment Accessibility Standards Sub Committee Recommendations Stretcher Final Report
Support Equipment Features Addressed in Technical Criteria Types Of Equipment To Which Technical Criteria Applies Supine, prone, or side-lying position (M301) Transfer...
-
(1) Transfer Surface Location for Diagnostic Equipment Used in the Supine, Prone, or Side-lying Position
These orientations are now identified as an end transfer surface and side transfer surface....