Advisory 11B-802.1.3 Depth. Figure 11B-802.1.3 (b) depicts a single wheelchair space with side entry....
Search Results "Submerged Depth"
Filters
Commonly Searched Documents
-
11B-802.1.3 Depth
-
11B-1009.4.3 Wall depth and length
The depth of the transfer wall shall be 12 inches (305 mm) minimum and 16 inches (406 mm) maximum....
-
802.1.3 Depth
802.1.3 Depth. Where a wheelchair space can be entered from the front or rear, the wheelchair space shall be 48 inches (1220 mm) deep minimum....
-
M303.2.3 Depth
The depth of wheelchair spaces shall comply with M303.2.3....
-
703.2.1 Depth
703.2.1 Depth. Raised characters shall be 1/32 inch (0.8 mm) minimum above their background....
-
Check-Out Aisles and Sales and Service Counters
Section 904.4 of the 2010 Standards also clarifies that the accessible portion of the counter must extend the same depth as the sales or service counter top....
-
11B-602.8 Depth
11B-602.8 Depth. Wall- and post-mounted cantilevered drinking fountains shall be 18 inches (457 mm) minimum and 19 inches (483 mm) maximum in depth....
-
802.1.3 Depth
Figure 802.1.3 Depth of Wheelchair Spaces in Assembly Areas...
-
11B-306.3.3 Minimum required depth
Exceptions: At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish floor or ground at a depth...
-
4. Wheelchair seat depth
Wheelchair seat depth For this study, wheelchair seat depth was calculated as the horizontal distance from the proximal (i.e., towards the rear) edge to the distal (i.e., towards the...
-
Seat width and depth
Seat width and depth: ADA-ABA currently requires a minimum entry point of 24 inches for transfer steps in play (Section 1008.3.1.1) [7] and pool areas (Section 1009.4.5) [7]. ...
-
R405.2.2 Maximum Depth
R405.2.2 Maximum Depth. Toe clearance shall extend 635 mm (2.1 ft) maximum under an element....
-
306.2.2 Maximum Depth
306.2.2 Maximum Depth. Toe clearance shall extend 25 inches (635 mm) maximum under an element....
-
11B-703.2.1 Depth
11B-703.2.1 Depth. Raised characters shall be 1/32 inch (0.8 mm) minimum above their background....
-
Reach Ranges
Section 4.2.6 of the 1991 Standards specifies a maximum 54-inch high side reach and a minimum 9-inch low side reach for an unobstructed reach depth of 10 inches maximum....
-
Structure Sensor 3D Depth Scanning Software for 3D Imaging and Printing
The magic of 3D depth sensing begins with the ability to capture fast, accurate, dimensions of objects and environments....
-
11B-602.8 Depth
Wall- and post-mounted cantilevered drinking fountains shall be 18 inches (457 mm) minimum and 19 inches (483 mm) maximum in depth....
-
11B-602.8 Depth
Wall- and post-mounted cantilevered drinking fountains shall be 18 inches (457 mm) minimum and 19 inches (483 mm) maximum in depth....
