[See subsections ...]
Search Results "Security Barrier"
-
T603 Wheelchair Securement Systems
-
§ 38.159(d)(1) Design load
Securement systems, and their attachments to vehicles, shall restrain a force in the forward longitudinal direction of up to 2,000 pounds (8,880 N) per securement leg or clamping mechanism...
-
§ 38.159(d)(5) Movement
When the wheelchair or mobility aid is secured in accordance with manufacturer's instructions, the securement system shall limit the movement of an occupied wheelchair or mobility aid to...
-
§ 38.23(d)(7) Seat belt and shoulder harness
For each wheelchair or mobility aid securement device provided, a passenger seat belt and shoulder harness, complying with all applicable provisions of part 571 of this title, shall also...
-
III-4.5000 Alternatives to barrier removal
[See subsections ...]
-
101.2 Effect on Removal of Barriers in Existing Facilities
Removal of architectural barriers, pursuant to 28 C.F.R. s. 36.304, from buildings, structures or facilities shall comply with this code’s requirements for alterations unless compliance...
- Rockwood Manufacturing Company 604 Door Guard - Solid Cast Brass
- Rockwood Manufacturing Company 603 Door Guard - Cast Aluminum
-
May a transit operator require that wheelchairs be secured in buses and vans?
Therefore, the operator may decline to provide service to a rider who refuses to allow his or her wheelchair to be secured....
-
May a transit operator require that wheelchairs be secured in buses and vans?
Yes, if the transit operator has established such a policy, and the vehicle is required to be equipped with a securement system by 49 CFR Part 38....
-
§ 36.310(b) Barrier removal
(b) Barrier removal....
-
What kinds of securement equipment must be provided in buses and vans?
Section 38.23(d) of the DOT ADA regulations requires all ADA-compliant buses and vans to have a two-part securement system, one to secure the wheelchair, and a seat belt and shoulder...
-
What kinds of securement equipment must be provided in buses and vans?
Section 38.23(d) of the DOT ADA regulations requires all ADA-compliant buses and vans to have a two-part securement system, one to secure the wheelchair, and a seat belt and shoulder harness...
-
8. Revise § 37.165(b) to read as follows
8. Revise § 37.165(b) to read as follows:
-
VIII. Existing Facilities: Alternatives to Barrier Removal
The ADA requires the removal of physical barriers, such as stairs, if it is "readily achievable."...
-
Inexpensive steps businesses might take to improve access may include:
Inexpensive steps businesses might take to improve access may include: Installing a ramp over a step or two at the main entrance. Making a curb cut in the business's...
-
ALTERNATIVES TO BARRIER REMOVAL
§36.305 <P36.305> ALTERNATIVES TO BARRIER REMOVAL. §36.305(a) GENERAL....
-
Architectural Barriers Act
Architectural Barriers Act ________________________________________________________________ 1968 The Architectural Barriers Act mandates the removal of what is perceived to be...
-
APPENDIX D: Provisions of the Architectural Barriers Act Accessibility Standards (ABAAS)
that are referenced in the FSORAG Technical Provisions The ABAAS are available at http://www.access-board.gov/ada-aba/aba-standards-gsa.cfm
-
1. Access Barrier Removal in Existing Pedestrian Facilities
Access Barrier Removal in Existing Pedestrian Facilities The Settlement Agreement requires the City to spend approximately $1.37 billion over the next thirty (30) years to implement...
-
11B-205.1 General
Cleats and other boat securement devices shall not be required to comply with Section 11B-309.3. 8....
-
11B-205.1 General
Cleats and other boat securement devices shall not be required to comply with Section 11B-309.3. 8....