The metal ring provides added strength and cracking resistance to the flange and can be rotated to allow precise alignment of bolts and screws. Solvent welds inside of 4" or...
Search Results "Lavatory Centerline"
-
Oatey Level Fit Offset Closet Flange Metal Ring 43500 - ABS 15150
-
Sioux Chief FullFlush™ Offset Flange 889-AOM
Full-flow, 3" I.D. throat – no restriction Allows for 1?½" offset in any direction for closet bowl setting Corrosion-resistant 430 stainless steel swivel ring is engineered...
-
Zurn Z1209 Vertical Offset Siphon Jet Water Closet Support System
FEATURES: Vertical, offset water closet carrier 300 lb. load capacity
-
382.65 What are the requirements concerning on-board wheelchairs?
In aircraft with more than 60 passenger seats, carriers must provide an onboard wheelchair if the aircraft has an accessible lavatory....
-
1134A.8, Item 4.1
The space beneath the lavatory shall be left clear and unobstructed;...
-
1134A.8, Item 4.1
The space beneath the lavatory shall be left clear and unobstructed;...
-
Exposed Pipes and Surfaces [4.19.4]
Exposed Pipes and Surfaces [4.19.4] To prevent burns, hot water pipes and drain pipes under lavatories must be insulated or otherwise configured to protect against contact....
-
1134A.8, Item 4.2
Any cabinet beneath the lavatory shall be removable without the use of specialized knowledge or specialized tools; or,...
-
1134A.8, Item 4.2
Any cabinet beneath the lavatory shall be removable without the use of specialized knowledge or specialized tools; or...
-
H9
Are the drain and hot water pipes for this lavatory insulated or otherwise configured to protect against contact? [ADA Standards § 4.19.4] Yes No...
-
Sioux Chief Closet Flanges Demonstration Video
Sioux Chief offers a wide variety and complete line of closet flanges. Innovative design can be seen and experienced with our TKO™ closet flange, with and without stainless steel...
-
Sioux Chief Closet Flange Family Animation Video
Sioux Chief's closet flanges do what flanges are designed to do — anchor the toilet to the floor and make a secure connection to the drain. And they do so with the quality and...
-
11B-604.5.2 Rear wall
The rear wall grab bar shall be 36 inches (914 mm) long minimum and extend from the centerline of the water closet 12 inches (305 mm) minimum on one side and 24 inches (610 mm) minimum on...
-
11B-604.5.2 Rear wall
The rear wall grab bar shall be 36 inches (914 mm) long minimum and extend from the centerline of the water closet 12 inches (305 mm) minimum on one side and 24 inches (610 mm) minimum on...
-
11B-306.3.3 Minimum required depth
At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish floor or ground at a depth of 8 inches (203 mm...
-
11B-306.3.3 Minimum required depth
Exceptions: At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish floor or ground at a depth...
-
11B-306.3.3 Minimum required depth
Exceptions: At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish floor or ground at a depth...
-
11B-809.9.1 Clear floor space
Clear floor spaces 30 inches (762 mm) by 48 inches (1219 mm), with centerlines aligned with the centerline of the work surface, appliance, sink or fixture, shall be provided in the following...
-
11B-809.9.1 Clear floor space
Clear floor spaces 30 inches (762 mm) by 48 inches (1219 mm), with centerlines aligned with the centerline of the work surface, appliance, sink or fixture, shall be provided in the following...
-
11B-809.10.8.6 Controls
Faucet controls and operating mechanisms shall comply with Section 11B-309.4.
-
11B-809.10.8 Lavatories, vanities, mirrors and towel bars
Bathing rooms or powder rooms required to comply with Section 11B-809.10 shall provide lavatories complying with this section....
-
11B-809.10.5.1 Clear floor space
The area under a lavatory, located at the control end of the tub, shall be permitted to encroach on the clear floor space provided the lavatory is 19 inches (483 mm) maximum in depth, and...
-
11B-809.10.5.1 Clear floor space
The area under a lavatory, located at the control end of the tub, shall be permitted to encroach on the clear floor space provided the lavatory is 19 inches (483 mm) maximum in depth, and...
-
Sinks [F212.3, Exception 2]
Lavatories must comply with the technical requirements for lavatories in section 606 of the ABA Standards....
