All three concurred with adding cross section dimension requirements to standing supports....
Search Results "Head Support"
Filters
Commonly Searched Documents
-
M305.3 Standing Supports (Section-by-Section Analysis)
-
M304.2.2 Standing Supports (Section-by-Section Analysis)
requirements for standing supports in proposed M305.3....
-
D. M304 Diagnostic Equipment Used by Patients in a Standing Position
There was only one significant change made to the requirement of standing supports on the diagnostic equipment....
-
4.20.6 SHOWER UNIT
A shower spray unit with a hose at least 60 in (1525 mm) long that can be used as a fixed shower head or as a hand-held shower shall be provided....
-
4.20.6 Shower Unit
A shower spray unit with a hose at least 60 in (1525 mm) long that can be used both as a fixed shower head and as a hand-held shower shall be provided....
-
M302.3.2 Leg Supports (Section-by-Section Analysis)
The MDE NPRM did not propose to require stirrups to provide a method of supporting, positioning, and securing the patient’s legs for diagnostic equipment used by patients in the seated position...
-
Q4. If someone's dog calms them when having an anxiety attack, does this qualify it as a service animal?
The ADA makes a distinction between psychiatric service animals and emotional support animals....
-
M305.3.1 Length
The length of gripping surfaces for standing supports shall be based on the position of the standing supports in relation to the standing surfaces they serve....
-
M305.3.1 Length (Section-by-Section Analysis)
The MDE Advisory Committee supported the proposed technical provisions, but recommended adding additional criteria for standing supports on raised platforms with wheelchair spaces....
-
5.4.5.1 Transfer and Positioning Support Position for Imaging Equipment
5.4.5.1 Transfer and Positioning Support Position for Imaging Equipment....
-
4.8.1 General
Exception: In facilities where vandalism is a consideration, two fixed shower heads may be provided instead of the hand-held shower spray....
-
M305.3.2.1 Horizontal Position
The height of the top of the gripping surface on horizontal standing supports shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum above the standing surface....
-
M305.3.1.1 Horizontal Position
The length of gripping surfaces on horizontal standing supports shall be 4 inches (100 mm) minimum except for diagnostic equipment containing a wheelchair space which shall comply with M305.3.1.2...
-
5.4.5.1 Transfer and Positioning Support Position Recommendation for Imaging Equipment
5.4.5.1 Transfer and Positioning Support Position Recommendation for Imaging Equipment On imaging equipment, the transfer surface is oriented along the long dimension of the surface where...
-
1193.33(b) (Advisory Guidance)
Paragraph (b) 1. This paragraph requires manufacturers to supply a point of contact for obtaining information about accessibility features of the product and how to obtain...
-
602.1 General
Documentation that supports the use of ICT shall conform to 602. Advisory 602.1 General. ...
-
5.4.2.2 Transfer and Positioning Support Length for Imaging Equipment with Transfer Surfaces
5.4.2.2 Transfer and Positioning Support Length for Imaging Equipment with Transfer Surfaces....
-
Vertical clearance and protruding objects
• Entrances and aisles with adequate head clearance and minimal projections into the path of travel result in easier navigation for people with lessened visual acuity or those who may be...
-
1018.9 Protruding Objects
Constructed elements on beach access routes and resting intervals shall comply with 307. Advisory 1018.9 Protruding Objects. Protruding objects on beach access routes and resting...
-
Question 13
YES/NO 13. Are all objects that hang over the aisles(e.g., seasonal lighting, display merchandise) 80 inches or more above the route?
-
C2‒3
C2‒3. Are all objects that hang over the pedestrian routes at least 80 inches above the route? [ADA Standards § 4.4.2] Yes No If No, can the objects be removed or...
-
1018.9 Protruding Objects
Constructed elements on beach access routes and resting intervals shall comply with 307. Advisory 1018.9 Protruding Objects. Protruding objects on beach access routes and...
-
1018.9 Protruding Objects
This section requires constructed elements on beach access routes and resting intervals to comply with the technical requirements for protruding objects in 307 of the Architectural...
-
M305.3.2 Vertical Position
Where the support is vertical, it shall be 18 inches (455 mm) minimum in length and the bottom end of the support shall be 34 inches (865 mm) high minimum and 37 inches (940 mm) high maximum...