Dining surfaces include, but are not limited to, bars, tables, lunch counters, and booths....
Search Results "Side Grab Bar"
-
11B-902.1 General
-
11B-404.3.5 Controls
Where push plates, vertical actuation bars or other similar operating devices are provided, they shall be placed in a conspicuous location....
-
11B-902.1 General
Dining surfaces include, but are not limited to, bars, tables, lunch counters, and booths....
-
Approach: ADA Standard Section 305.6
Section 305.6 covers the current ADA Standards for the approach to clear floor space.
-
Do access aisle borders (in blue) have to be painted on all four sides to be considered compliant?
I would say yes as the language in the code is pretty specific using the term "perimeter". I would also say that both of the "end" lines would/could be within the required length.
-
11B-406.5.2 Width
The clear width of curb ramp runs (excluding any flared sides), blended transitions, and turning spaces shall be 48 inches (1219 mm) minimum....
-
11B-406.5.2 Width
The clear width of curb ramp runs (excluding any flared sides), blended transitions, and turning spaces shall be 48 inches (1219 mm) minimum....
-
GUARD [DSA-AC] OR GUARDRAIL
A building component or a system of building components located at or near the open sides of elevated walking surfaces that minimizes the possibility of a fall from the walking surface to...
-
GUARD [DSA-AC, HCD 1, HCD 2 & HCD 1-AC] OR GUARDRAIL
A building component or a system of building components located at or near the open sides of elevated walking surfaces that minimizes the possibility of a fall from the walking surface to...
-
104 Conventions
When the requirement states a specified range, such as in section 609.4 where grab bars must be installed between 33 inches and 36 inches above the finished floor, that range provides an...
-
F104.1.1 Construction and Manufacturing Tolerances
Where the requirement states a specified range, such as in 609.4 where grab bars must be installed between 33 inches and 36 inches above the floor, the range provides an adequate tolerance...
-
11B-604.3.2 Overlap
The required clearance around the water closet shall be permitted to overlap the water closet, associated grab bars, dispensers, sanitary napkin disposal units, coat hooks, shelves, accessible...
-
What barriers will it be "readily achievable" to remove?
9) Installing offset hinges to widen doorways; 10) Eliminating a turnstile or providing an alternative accessible path; 11) Installing accessible door hardware; 12) Installing grab...
-
11B-604.9 Water closets and toilet compartments for children's use
15 to 18 inches (381 to 457 mm) Toilet Seat Height 11 to 12 inches (279 to 305 mm) 12 to 15 inches (305 to 381 mm) 15 to 17 inches (381 to 432 mm) Grab...
-
11B-604.9 Water closets and toilet compartments for children's use
mm) Toilet Seat Height 11 to 12 inches (279 to 305 mm) 12 to 15 inches (305 to 381 mm) 15 to 17 inches (381 to 432 mm) Grab...
-
F105.2.2 ASME
that at least two flat steps be provided at the entrance and exit of every escalator and that steps on escalators be demarcated by yellow lines 2 inches wide maximum along the back and sides...
-
11B-502.6.4.2
The centerline of the International Symbol of Accessibility shall be a maximum of 6 inches (152 mm) from the centerline of the parking space, its sides parallel to the length of the parking...
-
11B-308.4 Suggested reach ranges for children
These dimensions apply to either forward or side reaches....
-
11B-502.6.4.2
The centerline of the International Symbol of Accessibility shall be a maximum of 6 inches (152 mm) from the centerline of the parking space, its sides parallel to the length of the parking...
-
11B-308.4 Suggested reach ranges for children
These dimensions apply to either forward or side reaches....
- American Stair Corp. Standard Railings
- Speakman Versatile Thermostatic ADA Handheld Combination System SM-5080-ADA
- EduCAPTION
-
11B-705.2 Detectable directional texture
Detectable directional texture at transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm), with bars...