No fewer than one shelf shall be provided in close proximity to the changing table at 40 inches (1016 mm) minimum and 48 inches (1219 mm) maximum above the finish floor.
Search Results "Mobile Facility"
-
11B-813.2.6 Shelf
-
11B-245.2 Application
When a public accommodation is located in a private residence, that portion used exclusively in the operation of the public accommodation or that portion used both for the public...
-
11B-813.2.3 Lavatory
One lavatory in compliance with Section 11B-606.
-
810.8 Clocks
810.8 Clocks. Where clocks are provided for use by the public, the clock face shall be uncluttered so that its elements are clearly visible. Hands, numerals and digits shall contrast...
-
208.2.3.3 Parking for Guests, Employees, and Other Non-Residents
208.2.3.3 Parking for Guests, Employees, and Other Non-Residents. Where parking spaces are provided for persons other than residents, parking shall be provided in accordance with...
-
810.8 Clocks
Where clocks are provided for use by the public, the clock face shall be uncluttered so that its elements are clearly visible. Hands, numerals and digits shall contrast with the...
-
208.2.3.3 Parking for Guests, Employees, and Other Non-Residents
Where parking spaces are provided for persons other than residents, parking shall be provided in accordance with Table 208.2.
-
Space Needs
Figure 7 was composed to provide a general idea of the variability observed among participants in 1) the amount of space in front of the platform required by each participant and...
-
Highest and Lowest Heights Obtained
Table 9 shows the 5th, 25th, 50th, 75th, and 95th percentiles for protocols A through C. These data represent the ability of the participants in the study to complete a transfer. The...
-
8. Boarding Separately From Wheelchair
A wheelchair user's request to board a fixed route or paratransit vehicle separately from his or her device when the occupied weight of the device exceeds the design load of the...
-
11B-216.5.2.2 Additional signs
Signs within parking facilities containing parking spaces complying with Section 11B-502 shall comply with Section 11B-502.8....
-
§ 37.9(d)(1)(i)(A)
(A) A public or private entity that provides transportation facilities subject to the provisions of subpart C of this part, or other appropriate party with the concurrence of the Administrator...
-
11B-216.5.2.2 Additional signs
Signs within parking facilities containing parking spaces complying with Section 11B-502 shall comply with Section 11B-502.8....
-
F206.7.10 Recreational Boating Facilities and Fishing Piers and Platforms
Platform lifts shall be permitted to be used instead of gangways that are part of accessible routes serving recreational boating facilities and fishing piers and platforms....
-
206.7.10 Recreational Boating Facilities and Fishing Piers and Platforms
Platform lifts shall be permitted to be used instead of gangways that are part of accessible routes serving recreational boating facilities and fishing piers and platforms....
-
KMIR 6 News Story: Jack Nicklaus Fund Raiser for Wounded Veterans, featuring SoloRider golf carts
Nine"); * Complete the construction of the Rehabilitation and Learning Center for physical therapy, fitness training, skills assessment and golf lessons for every level of ability and mobility...
-
Do the ADA Standards apply to existing facilities that are not subject to the alterations requirements?
DOJ’s ADA regulations address access to existing facilities that are not being altered....
-
11B-1010.1 Turning space
A circular turning space 60 inches (1524 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions....
-
1010.1 Turning Space
A circular turning space 60 inches (1525 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions....
-
11B-1010.1 Turning space
A circular turning space 60 inches (1524 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions....
-
11B-1010.1 Turning space
A circular turning space 60 inches (1524 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions....
-
1010.1 Turning Space
A circular turning space 60 inches (1525 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions....
-
11B-233.1 General
” §35.151(b) “each facility or part of a facility altered by, on behalf of, or for the use of a public entity….....
-
11B-233.1 General
” §35.151(b) “each facility or part of a facility altered by, on behalf of, or for the use of a public entity….....
