The bench shall provide for back support or shall be affixed to a wall along its long dimension....
Search Results "Car Dimension"
-
11B-903.4 Back support
-
11B-903.4 Back support
The bench shall provide for back support or shall be affixed to a wall along its long dimension....
-
Transportation Facilities
The ADA also establishes standards for transportation vehicles, including buses, vans, and rail cars (which are not discussed in this guide)....
-
NPRM
NPRM proposed that, at new or altered platforms in intercity and commuter rail stations, rail operators would have to ensure that passengers with disabilities would be able to board any car...
-
Clarification on Standard Roll-In Shower Compliance
Standard roll-in type shower compartments shall be 30 inches (762 mm) wide minimum by 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides...
-
PLATFORM (WHEELCHAIR) LIFT
A hoisting and lowering mechanism equipped with a car or platform or support that serves two landings of a building or structure and is designed to carry a passenger or passengers and (or...
-
Urinal Depth
In the proposed rule, the Board sought to clarify the requirement in the original ADAAG that accessible urinals have an "elongated" rim by specifying a minimum dimension of 13 ½ inches,...
-
5.2.1.4 Transfer Surface Size for Imaging Equipment
The transfer surface should be located such that the long dimension of 28 inches is located parallel to the patient scanning/imaging side of the table....
-
407.12.3.1 Unobstructed Forward Reach (Section-by-Section Analysis)
These dimensions and their resulting geometry are consistent with the ADA and ABA Accessibility Guidelines (36 CFR Part 1191, Appendix D, sections 306 and 308)....
-
4.10.3 Hall Call Buttons
Call buttons shall be a minimum of 3/4 in (19 mm) in the smallest dimension. The button designating the up direction shall be on top. (See Fig. 20.) Buttons shall be raised or flush....
-
4.10.3 HALL CALL BUTTONS
Call buttons shall be a minimum of 3/4 in (19 mm) in the smallest dimension. The button designating the up direction shall be on top (see Fig. 20). Buttons shall be raised or flush....
-
Size and Clearances [4.21.2]
The 36 by 36 inch dimension, measured to the interior finish, keeps front and side grab bars within reach from the seat....
-
11B-303.5 Warning curbs
Abrupt changes in level exceeding 4 inches (102 mm) in a vertical dimension between walks, sidewalks or other pedestrian ways and adjacent surfaces or features shall be identified by warning...
-
608.2.1 Transfer Type Shower Compartments
Transfer type shower compartments shall be 36 inches (915 mm) by 36 inches (915 mm) clear inside dimensions measured at the center points of opposing sides and shall have a 36 inch (915...
-
§ 37.87(b)
(b) Amtrak or a commuter authority may purchase or lease a used intercity or commuter rail car that is not readily accessible to and usable by individuals if, after making demonstrated good...
-
§ 38.63(a) Requirement
Suitable devices or systems shall be provided to prevent, deter or warn individuals from inadvertently stepping off the platform between cars....
-
§ 37.3 Automated guideway transit system or AGT
Automated guideway transit system or AGT means a fixed-guideway transit system which operates with automated (driverless) individual vehicles or multi-car trains....
-
FIGURE INDEX
Curb Ramps Subject to DOT Regulation 49CFR37.21 Figure 407.2.2.2 Visible Hall Signals Figure 407.2.3.1 Floor Designations on Jambs of Elevator Hoistway Entrances Figure 407.2.3.2 Car...
-
Wheelbase Definition
The larger of the dimensions measured on the right and left side of the mobility device were considered for the analysis....
-
11B-604.9 Water closets and toilet compartments for children's use
TABLE 11B-604.9 SUGGESTED DIMENSIONS FOR CHILDREN’S USE SUGGESTED DIMENSIONS FOR WATER CLOSETS SERVING CHILDREN AGES 3 THROUGH 12 Ages...
-
Outdoor Constructed Features
The proposed rule based the size of the clear ground space at outdoor constructed features on the dimensions for clear floor or ground surfaces in 305.2 of the Architectural Barriers Act...
-
Wheelchair Spaces (M303.2)
This dimension is based on provisions in the 2004 ADA and ABA Accessibility Guidelines for maneuvering clearance where a clear floor or ground space is confined on all or part of three sides...
-
4.3.7 Clear Floor Space for Reaching
4.3.7 Clear Floor Space for Reaching Clear floor space dimensions for reaching are different than for seating because they require a specific orientation to the target....
-
Choice of Device
For example, if golf cars are generally prohibited in a park, the park may be required to allow a golf car when it is being used because of a person's mobility disability, unless there is...