The standard includes additional provisions for runway enclosures, electrical equipment and wiring, structural support, headroom clearance (which is 80 inches minimum), lower level access...
Search Results "Knee Clearance"
Filters
Commonly Searched Documents
-
F105.2.2 ASME
-
7.4 Legal and Regulatory Considerations
their safety and effectiveness.OO In addition, FDA exempts several categories of common medical devices, including most radiological tables, examination tables, and scales, from any FDA clearance...
-
Roundabouts (Section-by-Section Analysis)
a flashing yellow signal, then a steady yellow signal, then two steady red signals during the pedestrian walk interval, and then alternating flashing red signals during the pedestrian clearance...
-
4.3.5.3 180-degree turn around an obstacle
When the entry and egress aisles are less than this width, the 360-degree turn clearances should be provided at the turning area....
-
Regulatory Process Matters
$1,392 Automatic doors serving accessible means of egress required to provide maneuvering clearance or to have standby power....
-
105.2.2 ASME
The standard includes additional provisions for runway enclosures, electrical equipment and wiring, structural support, headroom clearance (which is 80 inches minimum), lower level access...
-
382.23 May carriers require a passenger with a disability to provide a medical certificate?
These impairments, by and large, are not sicknesses requiring medical treatment or clearance (though, of course, persons with disabilities can have illnesses like everyone else)....
-
105.2.2 ASME
The standard includes additional provisions for runway enclosures, electrical equipment and wiring, structural support, headroom clearance (which is 80 inches minimum), lower level access...
-
7.1 Basic Understanding of Diagnostic Imaging Equipment
Food and Drug Administration (FDA) classifies most diagnostic imaging technologies as Class II medical devices, most of which need FDA clearance (via a “510(k)” notification) prior to being...
-
1. Question: What is the minimum width needed for a non-level boarding railroad passenger station platform to meet the accessibility requirements of the Americans with Disabilities Act (ADA)?
.), the minimum width should be the width of the vertical access feature (typically in the range of 8-12 feet) plus twice the 6 feet required by 49 CFR 37.42 for clearances around the sides...
-
TABLE OF CONTENTS
DIVISION 3: BUILDING BLOCKS 11B-301 General 11B-302 Floor or ground surfaces 11B-303 Changes in level 11B-304 Turning space 11B-305 Clear floor or ground space 11B-306 Knee...
-
AVAILABLE DATA DO NOT SUPPORT DEPARTING FROM THE CURRENTLY ACCEPTED STANDARD OF 19-INCH TRANSFER SURFACE HEIGHT
It goes on to state that: This measure is clinically relevant because it impacts the user’s overall sitting height, clearance under tables, clearance of foot supports above casters or...
-
405 Ramps
A clearance of 36 inches between handrails is required, except at those ramps that qualify for the clear width exception in 405.5. Comment....
-
1117B.2.9
The shelf shall be capable of accommodating a text telephone and shall have 6 inches (152 mm) minimum vertical clearance in the area where the text telephone is to be placed. 3. ...
-
Appendix to May 23, 2014 Document
Employee Work Areas: Sections 203.9 (General exception for employee work areas), 206.2.8 (Circulation paths in employee work areas), and the Exceptions to 403.5 (Clearances within employee...
-
ASME
The standard includes additional provisions for runway enclosures, electrical equipment and wiring, structural support, headroom clearance (which is 80 inches minimum), lower level access...
-
Determining appropriate auxiliary aids. (Section-by-Section Analysis)
For example, a deaf individual may go to a private community health center with what is at first believed to be a minor medical emergency, such as a sore knee, and the individual with a...
-
Beneficial Designs The Universal Trail Assessment Process (UTAP)
Also included in the tool kit is a good old-fashioned tape measure to measure tread and clearance widths and the magnitude of obstacles, two clipboards to hold data sheets, preprinted marking...
-
Expert Report of Jeromy G. Murphy, American Construction Investigations, LTD (August 6, 2018)
Building Entrance: The slope in the maneuvering clearance at the exterior entrance exceeds 1:48 (1991 ADA Stds 4.5.2, 4.13.6; 2010 ADA Stds 305.2, 404.2.4.4)....
-
[2010 ADAS] 105.2.2 ASME
The standard includes additional provisions for runway enclosures, electrical equipment and wiring, structural support, headroom clearance (which is 80 inches minimum), lower level access...
-
2.5.2.1 International Electrotechnical Commission (IEC) Standards
In addition, as part of its premarket notification (510(k)) clearance process and its premarket approval process (PMA), the FDA requires manufacturers to submit evidence of conformance to...
-
[2010 ADAS] 105.2.2 ASME
The standard includes additional provisions for runway enclosures, electrical equipment and wiring, structural support, headroom clearance (which is 80 inches minimum), lower level access...
-
2. Question: What is the minimum width needed for a level boarding railroad passenger station platform to meet the accessibility requirements of the Americans with Disabilities Act (ADA)?
.), the minimum width should be the width of the vertical access facility (typically in the range of 8-12 feet) plus twice the 6 feet required by 49 CFR 37.42(e)(1) for clearances around...
-
Accessible Route to Dumpster and Enclosure
This would trigger: a level area outside the gate to accommodate the door maneuvering clearance, operable door/gate hardware, clear width at doorway, and compliant closer speed...
