Department of Justice considers the communication-related elements of ATMs to be auxiliary aids and services, rather than structural elements, to which the safe harbor for elements built in compliance...
Search Results "Compliance Agreement"
-
Privacy: ADA Standard Section 707.4
-
11B-206.2.6 Performance areas
In compliance with Section 11B-206.7.1, wheelchair lifts may be used to access stages, platforms and orchestra pits used as performing areas....
-
11B-206.2.6 Performance areas
In compliance with Section 11B-206.7.1, wheelchair lifts may be used to access stages, platforms and orchestra pits used as performing areas....
-
11B-216.13.1 Use of Cleaner Air Symbol
including concessionaires, comply with the conditions of use identified in Section 11B-216.13.3, a Cleaner Air Symbol complying with Section 11B-703.7.2.5 is permitted to be posted in compliance...
-
5. Site Constraints, Technical Infeasibility, and Unusually Expensive Remediation
Locations at which site constraints make compliance with applicable design standards impracticable may be made compliant with the standards to the maximum extent feasible....
-
403.5.2 Clear Width at Turn
EXCEPTION: Where the clear width at the turn is 60 inches (1525 mm) minimum compliance with 403.5.2 shall not be required. ...
-
Carrier Programs
[Sec. 382.63(a)] The program must include: (i) a training schedule for training carrier personnel on compliance; and (ii) the carrier’s policies and procedures for accommodating individuals...
-
4.1.6(1)(d)
If stair modifications to correct unsafe conditions are required by other codes, the modifications shall be done in compliance with these guidelines unless technically infeasible....
-
1015.1 General
In alterations, when an entity determines that a condition in 1019 does not permit full compliance with a specific provision in 1015, the viewing area is permitted to comply with the provision...
-
4.5.1 General
In alterations, where a condition for exception in section 1.1 prohibits full compliance with a specific requirement for clear floor or ground space surface, slope, size, or location, the...
-
Are fire extinguishers required to comply with the ADA Standards?
The ADA Standards apply to fixed elements, such as a fire extinguisher cabinet, and require compliance with applicable requirements, including those for operable parts and storage....
-
What constitutes a “passenger loading zone”?
At other locations, compliance is not required even if passenger loading may occasionally occur, but is not specifically intended or reflected in the design....
-
Section 36.101 Purpose (Section-By-Section Analysis and Response to Comments)
prohibits discrimination on the basis of disability by public accommodations, requires places of public accommodation and commercial facilities to be designed, constructed, and altered in compliance...
-
Existing play areas. (Section-by-Section Analysis)
alterations; a second commenter advocated only the general safe harbor from compliance with the supplemental requirements....
-
Serving People with Disabilities in the Most Integrated Setting: Community Living and Olmstead
Notably, the October 19, 2010 settlement agreement signed by the Department of Justice, OCR and the State of Georgia will ensure that thousands of people with developmental disabilities...
-
DISPUTES AND ENFORCEMENT
The United States may review compliance with this Consent Decree at any time and may enforce this Consent Decree if the United States believes that this Consent Decree or any requirement...
-
Industries Where Safety Training is a Must
Worksite safety training programs are essential across many industries in the Aloha State, playing a crucial role in protecting workers, reducing accidents, and ensuring compliance with...
-
1009.2.1 Pool Lift Location
Where the entire pool depth is greater than 48 inches (1220 mm), compliance with 1009.2.1 shall not be required. 2....
-
Sec.36.304(d)(2)
(2) If, as a result of compliance with the alterations requirements specified in paragraph (d)(1) of this section, the measures required to remove a barrier would not be readily achievable...
-
1. Adoption of the 2010 ADA Standards for Accessible Design
To minimize compliance burdens on entities subject to more than one legal standard, these design standards have been harmonized with the Federal standards implementing the Architectural...
-
1. Adoption of the 2010 ADA Standards for Accessible Design
To minimize compliance burdens on entities subject to more than one legal standard, these design standards have been harmonized with the Federal standards implementing the Architectural...
-
403.5.2 Clear Width at Turn
EXCEPTION: Where the clear width at the turn is 60 inches (1525 mm) minimum compliance with 403.5.2 shall not be required. Figure 403.5.2 Clear Width at Turn...
-
Exceptions [1014.1, Exceptions 1 and 2]
When a condition for exception does not permit full compliance with a specific provision in the technical requirements for camp shelters, the camp shelter must comply with the specific provision...
-
12185(e) Review
the study required by subsection (a) of this section, the Office of Technology Assessment shall provide a preliminary draft of such study to the Architectural and Transportation Barriers Compliance...