Section 604.9.5 covers the current ADA Standards for flush controls on children's use water closets.
Search Results "Maximum Reach Depth"
-
Flush Controls: ADA Standard Section 604.9.5
-
11B-503.3.3 Marking
The area within the borderlines shall be marked with hatched lines a maximum of 36 inches (914 mm) on center in a color contrasting with that of the aisle surface....
-
11B-246.2 Camping facilities
provided, at least two campsites and one additional campsite for each 100 campsites or fraction thereof, shall be accessed by and connected to sanitary facilities by travel routes with a maximum...
-
11B-246.2 Camping facilities
provided, at least two campsites and one additional campsite for each 100 campsites or fraction thereof, shall be accessed by and connected to sanitary facilities by travel routes with a maximum...
-
11B-503.3.3 Marking
The area within the borderlines shall be marked with hatched lines a maximum of 36 inches (914 mm) on center in a color contrasting with that of the aisle surface....
-
904 Sales and Service Counters
The counter surface of check-out aisle counters is required to be 38 inches high maximum. Comments from persons with disabilities considered 38 inches to be too high. Response....
-
804.6.4 Range or Cooktop
The location of controls shall not require reaching across burners....
-
H. Compensatory Relief for Complainants and Release
The Cantrells and MSHA have reached their own agreement regarding the payment of compensatory damages, and they have agreed to keep that amount confidential as part of the consideration...
-
e-ii
Does the floor area of the elevator car have space to enter, reach the controls, and exit?...
-
A. Slope at Door
without any portion steeper than 1:50 (critical dimension of ´" or less), so persons who use wheelchairs do not roll away from the door when they take their hand off the wheelchair and reach...
-
904.2 Approach
the sales or service counter, locate the accessible counter close to the cash register so that a person using a wheelchair is visible to sales or service personnel and to minimize the reach...
-
5b.
Does the floor area of the elevator car provide space for wheelchair users to enter, reach the controls, and exit the car?...
-
Controls [4.21.5]
Controls [4.21.5] Controls and shower units can be located on any wall but where a folding seat is provided they must be located to be within reach of a person on the seat....
-
Are access key, card, or code entry systems permitted in elevators?
For example, card readers must be located within accessible reach ranges. Non-fixed portions, including keys and access cards issued to users, are not required to comply....
-
FAIRNESS OF SETTLEMENT
In reaching this conclusion, the Class Representatives and Class Counsel have considered the benefits of the settlement, the possible outcomes of continued litigation of these issues, the...
-
§ 38.159(a)(1) General
., lift or ramp) complying with paragraph (b) or (c) of this section and sufficient clearances to permit a wheelchair or other mobility aid user to reach a securement location....
-
Car Dimensions: ADA Standard Section 407.4.1
Section 407.4.1 covers the current ADA Standards for elevator car dimensions.
-
1.3.2 Focus Following NPRM Comments
the MDE Advisory Committee to address, as follows: Transfer surface height and size Permitted obstructions to the transfer surface Transfer support location and configuration Depth...
-
Key Study findings:
When multiple transfers are required to reach higher or lower surfaces 15.2% of the participants in this study could not complete them at any height (11 out of 72 participants; 8 of which...
-
14) Carpet and carpet tile
14) Carpet and carpet tile ADAAG: Same standards for carpet and carpet tile: maximum pile height of 1/2" (§4.5.3). UFAS: Carpet must have maximum pile height of 1/2"....
-
Other international standards
deviation of 3 mm in 3 m, Class B has a maximum deviation of 6 mm in 3 m, and a Class C has a maximum deviation of 6 mm in 600 mm....
-
610.3.1 Rectangular Seats
The rear edge of a rectangular seat shall be 2 1/2 inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall....
-
11B-610.3.1 Rectangular seats
The rear edge of a rectangular seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (381 mm) minimum and 16 inches (406 mm) maximum from the seat wall....
-
4.3.8 Operating forces
Adequate clear floor space should be provided to access controls and switches from either the left or the right (see previous description of ‘Clear Floor Space for Reaching’)....