The mounting height of the bottom of mirrors at accessible lavatories (40 inches maximum above the floor) is based on the standard eye level range of adults seated in wheelchairs (43 to...
Search Results "Height Adjustable"
-
Mirrors [4.19.6]
-
11B-225.2.3 Library book stacks
ETA Editor's Note The ADA Advisory identifies library shelving as self-service shelving, which does not have a height limitation....
-
11B-608.3 Grab bars
Where multiple grab bars are used, required horizontal grab bars shall be installed at the same height above the finish floor....
-
205 and 309 Operable Parts
Standards, require operable parts on accessible elements, along accessible routes, and in accessible rooms and spaces to comply with the technical requirements for operable parts, including height...
-
6.3 Minority Reports
6.3 Minority Reports Because the Advisory Committee did not achieve consensus on the recommendation for a minimum transfer surface height standard, U.S....
-
407.12.3.2.2 Knee and Toe Space (Section-by-Section Analysis)
First, toe space with a reduced clear height of 9 inches (rather than 27 inches) would be permitted for a depth of no more than 6 inches....
-
III-7.5165 Signage
. , men's and women's rooms, room numbers, exit signs) must have raised and Brailled letters; must comply with finish and contrast standards; and must be mounted at a certain height and...
-
11B-608.3 Grab bars
Where multiple grab bars are used, required horizontal grab bars shall be installed at the same height above the finish floor....
-
11B-608.3 Grab bars
Where multiple grab bars are used, required horizontal grab bars shall be installed at the same height above the finish floor....
-
T504 Fare Collection Devices
A transit agency expressed concern that application of the requirements in this section, in conjunction with the maximum mounting height for operable parts specified in T304 (i.e., operable...
-
902 Dining Surfaces and Work Surfaces
Clear floor space is required for a forward approach (902.2), and a surface height of 28 to 34 inches is specified (902.3)....
-
Two Step Transfer Evaluation
Additionally, the study participants who made the two-step transfers appear more able on these transfers when comparing the heights achieved during the two-step transfers to the heights...
-
5.8.2 Knee and Toe Clearance Recommendations under Breast Platform Recommendations
Toe clearance shall be provided at a height of 9 inches above the floor to a depth of 6 inches maximum. M303.2.4.2 Knee Clearance....
-
B7-b
[ADA Standards § 4.7.2] Yes No Note: 1:12 is one inch of vertical height for each 12 inches of length....
-
1132A.4.1, Item 2
Thresholds with a change in height between ¼ inch (6.35 mm) and ¾ inch (19.05 mm) shall be beveled with a slope no greater than 1 unit vertical in 2 units horizontal (50-percent slope)....
-
Section 36.303(g)(5) Performance Requirements for Captioning Devices and Audio Description Devices
Proposed § 36.303(g)(2)(iii)(B) stated that the individual devices needed to be adjustable; be available to patrons in a timely manner; provide clear, sharp images; be properly maintained...
-
VALUATION THRESHOLD
[DSA-AC] An annually adjusted, dollar-amount figure used in part to determine the extent of required path of travel upgrades....
-
VALUATION THRESHOLD
[DSA-AC] An annually adjusted, dollar-amount figure used in part to determine the extent of required path of travel upgrades....
-
703.5.8 Character Spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
§ 1194.25(j)(3)
(3) Where any operable control is more than 10 inches and not more than 24 inches behind the reference plane, the height shall be 46 inches maximum and 15 inches minimum above the floor....
-
703.5.8 Character Spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
703.5.8 Character Spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
T702.6 Character Spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
e-ii
[ADA Standards § 4.7.2] Yes No Note: 1:12 is one inch of vertical height for 12 inches of horizontal distance....