Maximum Panel Width: Up to 42″. Panel Weight: Approximately 6 to 8 lbs/sqft changing with the height and width of the panels....
Search Results "Stroke Width"
Filters
Commonly Searched Documents
-
Panda US-51 All Aluminum ULTRA Folding Door System
-
Door King Inc. 6050 / 6100 Residential and Commercial Swing Gate Operator
Specifications: Model 6050 Maximum gate width 10-feet. Maximum gate weight 400 pounds*. ...
-
Uniform Federal Accessibility Guidelines (UFAS)
Section 4.13 of the ADA Standards tells you the technical provisions for doors that are specific requirements, such as the required clear passage width of a doorway. 3 The elevator...
-
D. What Does Title II of the ADA Require with Respect to Curb Ramps at Pedestrian Crossings?
To comply with ADA requirements, the curb ramps provided must meet specific standards for width, slope, cross slope, placement, and other features.3 In constructing facilities such as walkways...
-
Boarding Piers at Boat Launch Ramps
Because the entire chain also functions as a boarding pier, it must comply with all ADAAG provisions, including the 60-inch minimum clear pier width provision....
-
Results comparison with current accessibility guidelines
Second, it requires that a minimum of 30” (width) by 48” (76.2x121.9cm) for a transfer with the WMD positioned parallel to the ride and assume a parallel approach for the transfer (0°) (...
-
11B-504.4.1 Contrasting stripe
The stripe shall extend the full width of the step or upper approach and shall be of material that is at least as slip resistant as the other treads of the stair....
-
Panda S.51 All Aluminum Folding Door System
Maximum Panel Width: Up to 42″. Panel Weight: Approximately 6 to 8 lbs/sqft changing with the height and width of the panels....
-
Panda TS.60 Thermally Broken Folding Door System
Maximum Panel Width: Up to 42″. Panel Weight: Approximately 6 to 8 lbs/sqft changing with the height and width of the panels....
-
Road Roughness Analysis
WT also addresses the issue of lost time information, which occurs in PSD analysis, by using short width and long width windows at high and low frequencies respectively....
-
Design of Shared Use Paths, Street Intersections, and Midblock Crossings
Width C. Shoulders and Sideslopes 1. Width and Slope of Shoulders 2. Horizontal Clearance to Obstructions 3. Sideslopes D. (Traffic) Barriers and Railings E....
-
4.4 Knee and Toe Clearances
620-640 X 500-650 Reduction Angle 1:6 X X X Width...
-
C. Raised Porches Are Part Of the Store That Must Be Made Accessible and Located On An Accessible Route
compliant walking surfaces, slopes no greater than 1:20 in the direction of travel and cross slopes no greater than 1:48, vertical changes in level no higher than ¼”, and sufficient clear width...
-
E. What are the General Requirements for Curb Ramps in the ADA Standards for Accessible Design?
., dome-shaped bumps – that extend the full width and depth of the ramp. [§ 4.7.7] Transitions from the ramp to the walkway, gutter, and street must be flush (level) and free of...
-
Comparison of Single-User Toilet Room Layouts: 2A, 2B, and 2C
Depending on the width of the hallway and other circulation issues, it can be preferable to swing the entry door into the toilet room....
-
Water Closet Clear Floor Space in Toilet Compartments
The proposed rule also allowed a minimum width for the clearance of 48 inches instead of 60 inches where a lavatory overlaps the space, regardless of the approach (1102.11.5.2)....
-
Overview
For example, on or after March 15, 2012, reservations staff (of a hotel or a third party) will be required to identify accessible features in guest rooms (e.g. guest room door widths and...
-
2. New Construction and Alterations
It is not enough to simply show that a particular bathroom stall, for example, is less than the required width. The approximate extent of any shortfall must be proven....
-
1. Abdomen depth (AD)
., combinations of knee clearance height or depth, foot clearance height or depth, occupied width, etc.) then a multivariate analysis which involves simultaneous consideration of multiple...
-
Perpendicular Curb Ramps (R304.2) (Section-by-Section Analysis)
Transportation officials have reported that the 10 percent maximum slope for the flared sides can make it difficult to provide two perpendicular curb ramps at some street corners due to the width...
-
704.11 Parapets
the roof/ceiling framing elements are parallel to the walls, such framing and elements supporting such framing shall not be of less than 1-hour fire-resistance-rated construction for a width...
-
ADA Requirements
And, the Standards require doors with 32 inches of clear passage width, ramps and curb cuts for persons who use wheelchairs, crutches, and other mobility aids....
-
CCDA Accessibility Checklist for Building Inspectors, 2015 Edition
construction inspection finish product thicknesses such as flooring materials or wall coverings must be considered when reviewing critical accessibility features, including but not to, widths...
-
11B-504.4.1 Contrasting stripe
The stripe shall extend the full width of the step or upper approach and shall be of material that is at least as slip resistant as the other treads of the stair....
