Units of government at the state, county, and local levels are subject to the ADA and must comply with the ADA Standards in new construction and alterations....
Search Results "Fundamental Alteration"
-
State and Local Government Facilities
-
State and Local Government Facilities: Guidance on the Revisions to 28 CFR Section 35.151
State and Local Government Facilities: Guidance on the Revisions to 28 CFR Section 35.151 Section 35.151(a), which provided that those facilities that are constructed or altered by, on...
-
Q12: Full-depth Pavement Patching
If the pavement patching impacts the curb at a pedestrian street crossing where no curb ramp exists, the work affecting the curb falls within the definition of “alteration,” and a curb ramp...
-
5. Are there any tax credits or deductions to help me comply?
The tax credit can be used to offset the cost of undertaking barrier removal and alterations to improve accessibility; providing accessible formats such as Braille, large print and audio...
-
Section 35.151(d) Scope of Coverage (Section-by-Section Analysis)
that the requirements established by this section, including those contained in the proposed standards, prescribe what is necessary to ensure that fixed or built-in elements in new or altered...
-
5) Mercantile
Auxiliary counters are permissible in alterations (§7.2(1)). * At counters without cash registers, such as bank teller windows and ticketing counters, three alternatives are possible: (1...
-
Conditions for an Exception in FSTAG
To ensure that the unique characteristics of the outdoor environment and trail recreation opportunities aren't compromised or fundamentally altered, exceptions and deviations from some technical...
-
The ADA and Department of Justice Regulations
state and local government services, places of public accommodation, transportation, and other important areas of American life and, in addition, requires newly designed and constructed or altered...
-
R202.3.1 Existing Physical Constraints
Where existing physical constraints make it impracticable for altered elements, spaces, or facilities to fully comply with the requirements for new construction, compliance is required to...
-
Site Constraints
This is intended to cover altered facilities where limited space or other constraints preclude construction of a complying ramp....
-
Extensions
Handrail extensions are required on all new ramps but need not project into perpendicular circulation paths in alterations....
-
Scoping [4.1.3(21), 4.1.6(3)(h)]
In alterations, where this is not technically feasible, at least one accessible dressing room per floor is allowed for each sex (or one unisex room if that is the only type provided)....
-
Disproportionality (20%)
Regulations implementing the standards define “disproportionate” as exceeding 20% of the total cost of alterations to the primary function area....
-
11B-504.5 Nosings
Exception: In existing buildings there is no requirement to retroactively alter existing nosing projections of 1½ inches (38 mm) which were constructed in compliance with the building code...
-
11B-411.1.1 Floor designations
Exceptions: In existing facilities where new elevators are installed or existing elevators are altered into a destination-oriented elevator system, levels within stories, such as mezzanines...
-
11B-411.1.1 Floor designations
Exceptions: In existing facilities where new elevators are installed or existing elevators are altered into a destination-oriented elevator system, levels within stories, such as mezzanines...
-
11B-504.5 Nosings
Exception: In existing buildings there is no requirement to retroactively alter existing nosing projections of 1½ inches (38 mm) which were constructed in compliance with the building code...
- DeafSpace Project
-
11B-224.7.2 Multi-bedroom housing units with adaptable features
. ◼ ETA Editor's Note The following Access Board Note was taken from ADA Title II §35.151(f) New Construction and Alterations; Housing at a Place of Education, and ADA Title...
-
11B-404.2.5 Thresholds
[2010 ADAS] EXCEPTION: Existing or altered thresholds ¾ inch (19 mm) high maximum that have a beveled edge on each side with a slope not steeper than 1:2 shall not be required to comply...
-
Section 36.101 Purpose (Preamble, Section-by-Section Analysis)
This title prohibits discrimination on the basis of disability by public accommodations, requires places of public accommodation and commercial facilities to be designed, constructed, and altered...
-
BACKGROUND
The purpose of these code requirements is to ensure that barrier-free design is incorporated in all buildings, facilities, site work, additions, alterations, and structural repairs....
-
7.2 General Exceptions
The basis for the determination that General Exception 1 or General Exception 2 apply shall be documented and maintained with the records of the construction or alteration project. ...
-
7.2.2 General Exception 2
For long-distance trails, this exception applies to the trail segments that are planned for construction or alteration in a given planning period, rather than over the entire length of the...