The turning space shall be a T-shaped space within a 60 inch (1524 mm) square minimum with arms and base 36 inches (914 mm) wide minimum....
Search Results "Wheelchair Space (Medical Diagnostic Equipment)"
-
11B-304.3.2 T-Shaped space
-
11B-304.3.2 T-Shaped space
The turning space shall be a T-shaped space within a 60 inch (1524 mm) square minimum with arms and base 36 inches (914 mm) wide minimum....
-
5.4.4 Transfer Support Distance From Transfer Surface for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
5.4.4 Transfer Support Distance From Transfer Surface for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position....
-
Knee Clearance: Clearance as Measured from Anterior-Most Abdomen Point - Manual Wheelchair
Shaded areas depict the envelope of space required by the specified percentage of people if positioned with the abdomen touching an obstruction....
-
E202.5 ICT Functions Located in Maintenance or Monitoring Spaces
Where status indicators and operable parts for ICT functions are located in spaces that are frequented only by service personnel for maintenance, repair, or occasional monitoring of equipment...
-
5.2.1.2 Transfer Surface Depth
The transfer surface should be 17 inches deep minimum for all equipment used by patients in a supine, side-lying, or prone position with the exception of imaging equipment....
-
2. In § 37.3, add the definition “Direct threat” and revise the definition “Wheelchair” to read as follows
In § 37.3, add the definition “Direct threat” and revise the definition “Wheelchair” to read as follows:...
-
C201.5 Design, Development, and Fabrication
Telecommunications equipment manufacturers shall evaluate the accessibility, usability, and interoperability of ICT during its product design, development, and fabrication....
-
M301.4.2 Clearance Around Base
The base of the equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination surface...
-
Overlap: ADA Standard Section 604.3.2
Section 604.3.2 covers the current ADA Standards for overlapping clearances in the water closet clear floor space.
- Taking your first Spin on the Johnny G KRANKcycle® by Matrix
-
309.2 Clear Floor Space
A clear floor or ground space complying with 305 shall be provided....
-
309.2 Clear Floor Space
A clear floor or ground space complying with 305 shall be provided....
-
309.2 Clear Floor Space
A clear floor or ground space complying with 305 shall be provided. ...
-
H. Your Obligation to Provide Services and Equipment
[Sec. 382.39(a)(1)] Aircraft with more than 60 passenger seats having an accessible lavatory must be equipped with an operable on-board wheelchair....
-
100% Healed Policies
100% Healed Policies An employer will violate the ADA if it requires an employee with a disability to have no medical restrictions -- that is, be "100%" healed or recovered -- if the...
-
4. Breast Platform Adjustability
The MDE NPRM proposed to require diagnostic equipment used by patients seated in a wheelchair that have components which are used to examine specific body parts to be capable of examining...
-
5.2.1.1 Transfer Surface Width Recommendations for M301
Currently, the only equipment existing with a 30-inch transfer surface width is bariatric equipment. At the Committee’s December 2012 meeting, Dr....
-
Section 1630.13(b) Examination or Inquiry of Employees
Section 1630.13(b) Examination or Inquiry of Employees The purpose of this provision is to prevent the administration to employees of medical tests or inquiries that do not serve a...
-
11B-206.4.5 Tenant spaces
[2010 ADA Standards] 206.4.5 Tenant Spaces. At least one accessible entrance to each tenancy in a facility shall comply with 404....
-
11B-206.4.5 Tenant spaces
[2010 ADA Standards] 206.4.5 Tenant Spaces. At least one accessible entrance to each tenancy in a facility shall comply with 404....
-
11B-406.3.2 Turning space
A turning space 48 inches (1219 mm) minimum by 48 inches (1219 mm) minimum shall be provided at the bottom of the curb ramp....
-
11B-406.3.2 Turning space
A turning space 48 inches (1219 mm) minimum by 48 inches (1219 mm) minimum shall be provided at the bottom of the curb ramp....
-
M302.3.3 Head and Back Support
Where the diagnostic equipment is used in a reclined position, head and back support shall be provided....