The area under a lavatory, located at the control end of the tub, may be included in the clear floor space provided the lavatory is 19 inches (483 mm) maximum deep, and the knee and toe...
Search Results "Knee Clearance"
Commonly Searched Documents
-
1134A.5 Bathtubs
-
18 Inch Low Height
Steinfeld stated it could be a reasonable compromise since the group most affected by increasing the height would be manual wheelchair users who could accommodate a 1 inch change in vertical clearance...
-
R306.3.2 Pedestrian Activated Signals
a flashing yellow signal, then a steady yellow signal, then two steady red signals during the pedestrian walk interval, and then alternating flashing red signals during the pedestrian clearance...
-
Areas of Rescue Assistance [4.1.3(9), 4.3.11]
The minimum 48 inch width, measured between the leading edge of handrails, provides clearance for assisted evacuation....
-
Minimum Green Times
3.3 6.1 8.5 9.7 Segway 4 4.5 7.8 10.7 13.9 AASHTO calculation 5.2 9.8 11.4 12.8 Pedestrian clearance...
-
1. Access Barrier Removal in Existing Pedestrian Facilities
non-compliant cross-slopes in sidewalks or sections of sidewalks; (7) removal of protruding and overhanging objects and/or obstructions; (8) widening of pedestrian rights of way; (9) providing clearance...
-
Circulation Paths
If vertical clearance of an area adjoining an accessible route is reduced to less than 80 in (nominal dimension), a barrier to warn blind or visually-impaired persons shall be provided (...
-
2. Follow the Accessibility Standards for Play Areas
Where accessible routes serve ground level play components: • The vertical clearance shall be 80 inches high minimum. • The running slope not steeper than 1:16 or 6.25%....
-
Re: 404.2.6 Doors in Series and Gates in Series
To summarize my opinion, you need compliant door maneuvering clearance at each door, AND space to avoid fighting two doors at once....
- AJW Architectural Products UG30-A Series UG30-A12 12" Concealed Set Screw Flange, 1.5" Diameter Grab Bar - Configuration A
- Activar Hiawatha HG111 & HG112 Straight Tubular Pulls and HG113 & HG114 Push Bars
- AJW Architectural Products UG20-A Series UG20-A12 12" Concealed Set Screw Flange, 1.25" Diameter Grab Bar - Configuration A
- Door King Inc. 1150 Overhead Gate and Door opener
-
Doors at Entrances to Businesses
It may also be possible to use special "swing clear" hinges that provide approximately 1 1/2 inches more clearance without replacing the door and door frame....
-
Accessible Boat Slips
Other accessible slips can be located perpendicular to the end of the pier with clearance extending the width of the slip....
-
Grab bars
When two grab bars are provided there should be at least a 24-inch clearance between them....
-
Minimum Number [9.1.2 and 9.1.3]
NOTE *minimum door clearance required in all sleeping rooms and suites FACILITY TOTAL VISUAL APPLIANCES ONLY Total MOBILITY ACCESS & VISUAL APPLIANCES Total...
-
4.3.5.2 180-degree turn
4.3.5.2 180-degree turn Currently, the ADA-ABA does not have a specific clearance for this type of turn. The 1525 mm (60 in.) turning space would be used instead....
-
Types of Alternative Designs
alternatives: Water Closet: The water closet was moved further away from the sidewall (> 18+" from the sidewall to the centerline of toilet as specified in ADAAG) to provide more clearance...
-
Guidelines for Requirement 2
vertical height requirement at passenger loading zones as the minimal vertical clearance for garage parking....
-
Expert Report of Douglas J. Anderson, RAS, CASP, LCM Architects (August 8, 2018)
Voting Area: There is insufficient maneuvering clearance in front of voting station (1991 ADA Stds 4.2.3; 2010 ADA Stds 304.3)....
- citEcar Wheelchair 6PR SL Street Legal Golf Cart