walking surfaces with slopes not steeper than 1:20, the bottoms of handrail gripping surfaces shall be permitted to be obstructed along their entire length where they are integral to crash rails...
Search Results "High Speed Rail"
-
11B-505.6 Gripping surface
-
Gripping Surface: ADA Standard Section 505.6
Section 505.6 covers the current ADA Standards for the handrail gripping surface.
-
Overview
Overview This publication provides technical assistance on testing accommodations for individuals with disabilities who take standardized exams and other high-stakes tests....
-
11B-303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (12.7 mm) high maximum shall be beveled with a slope not steeper than 1:2. [2010 ADAS] Advisory 303.3 Beveled. ...
-
Common Problem: Protruding Objects
In "high-low" drinking fountain configurations, the "high" fountain often protrudes into a walkway and is not detectable by someone who is blind and who uses a cane. ...
-
3.2.2. Captioning and Audio Description Baselines
The Final RA uses three possible baselines (Low Accessibility, Medium Accessibility, and High Accessibility) that differ depending on the assumptions concerning the prevalence of auditoriums...
-
DEFINITIONS
Access Features Access Laws Accessible Medical Equipment (including high-priority accessible medical equipment) [Clarify that includes imaging equipment as well.]...
-
Three Additional Features for Van-Accessible Parking Spaces
wide designated parking space, a 96 inch wide min. marked access aisle and the following notes) Sign with "van accessible" and the international symbol of accessibility mounted high...
-
303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2. Advisory 303.3 Beveled....
-
303.2 Vertical
Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical. Figure 303.2 Vertical Change in Level...
-
11B-502.8.1 Size
The additional sign shall not be less than 17 inches (432 mm) wide by 22 inches (559 mm) high....
-
11B-502.8.1 Size
The additional sign shall not be less than 17 inches (432 mm) wide by 22 inches (559 mm) high....
-
11B-502.8.1 Size
The additional sign shall not be less than 17 inches (432 mm) wide by 22 inches (559 mm) high....
-
General Tips
If service counters are too high for some users, such as people of short stature and people using wheelchairs, step around counters to provide service....
-
1015.3 Height
Required guards shall not be less than 42 inches (1067 mm) high, measured vertically as follows: From the adjacent walking surfaces....
-
American Standard Colony Soft 2 - Handle Bidet Faucet
Speed Connect® from American Standard—the pre-assembled drain that makes American Standard the easiest brand bathroom faucet to install....
-
D. Unfunded Mandates Reform Act
Since the 2016 Non-Rail Vehicle Guidelines are issued pursuant to the ADA, which prohibits discrimination on the basis of disability, an assessment of the rule’s effect on state, local,...
-
M302.2.3 Transfer Sides
Armrests, footrests, and side rails are examples of obstructions....
-
§ 37.91(e)
(e) On any train in which either a single level or bi-level dining car is used to provide food service, a person providing intercity rail service shall provide appropriate aids and services...
-
1005.2.1 Height
At least 25 percent of the railings, guards, or handrails shall be 34 inches (865 mm) maximum above the ground or deck surface....
-
Unobstructed: ADA Standard Section 308.3.1
Section 308.3.1 covers the current ADA Standards for unobstructed side reach.
-
Priority 3: Toilet Rooms
Word Fillable Form (2.4MB) Word Non-Fillable Form (2.2MB) PDF Non-Fillable Form (0.7MB)
-
1014.2.1.2 Floor Height
The camp shelter floor at the entrance shall be 19 inches (485 mm) high maximum measured from the clear ground space....
-
4.1.6(3)(d)(ii)
(ii) If existing thresholds are 3/4 in high or less, and have (or are modified to have) a beveled edge on each side, they may remain....
