The slope of the landing in all directions shall be 1:48 maximum. Exception: Parallel curb ramps shall not be required to comply with Section 11B-406.5.3....
Search Results "Shower Slope"
Commonly Searched Documents
-
11B-406.5.3 Landings
-
Using the Beach Access Route Exceptions [1018.1, Exceptions 1 and 2]
Removable Beach Access Route Requirements Removable beach access routes are not required to comply with the specific requirements for running slope, cross slope, resting intervals, and...
-
R105 Definitions (Section-by-Section Analysis)
The proposed guidelines define the following terms: accessible, alteration, blended transition, cross slope, curb line, curb ramp, element, facility, grade break, operable part, pedestrian...
-
Grade (R302.5) (Section-by-Section Analysis)
Grade (R302.5) (Section-by-Section Analysis) Grade is the slope parallel to the direction of pedestrian travel....
-
CCDA Accessibility Checklist for Building Inspectors, 2015 Edition
The trained building code official/building inspector must assess the elevations and slopes of the existing streets and sidewalks, location of existing buildings, existing drainage and other...
-
1016.8 Resting Intervals
This section contains the technical requirements for the length (1016.8.1), width (1016.8.2), and slope (1016.8.3) of resting intervals; and for a turning space (1016.8.4) where resting...
-
Raised Crossings
Consult local Standards for application requirements, including slope for vehicle traffic, height, and markings....
-
1134A.5, Item 1
There shall be a minimum clear floor space 48 inches parallel by 30 inches perpendicular (1219 mm by 762 mm) to the side of a bathtub or bathtub-shower combination to provide for the maneuvering...
-
[F] 907.5.2.3.1 Public and common use areas
alarm notification appliances shall be provided in public use areas and common use areas, including but not limited to: Sanitary facilities including restrooms, bathrooms and shower...
-
1134A.5, Item 1
There shall be a minimum clear floor space 48 inches parallel by 30 inches perpendicular (1219 mm by 762 mm) to the side of a bathtub or bathtub-shower combination to provide for the maneuvering...
-
1009 Swimming Pools, Wading Pools, and Spas
Specifications are provided for various means of providing pool access, including pool lifts, sloped entries, transfer walls, transfer systems, and stairs....
-
T402.8.1 Deployment to Roadways or to Curb Height Boarding and Alighting Areas
The running slope of ramps and bridgeplates used for deployment to the roadway or to curb-height boarding and alighting areas shall be 1:6 maximum, as measured to ground level with the non-rail...
-
1007.3.1 Start of Play
A clear floor or ground space 48 inches (1220 mm) minimum by 60 inches (1525 mm) minimum with slopes not steeper than 1:48 shall be provided at the start of play....
-
Carpenter's levels
To determine angles the level must be used with a measuring tape to determine slope....
-
§ 35.151(i)(1)
(1) Newly constructed or altered streets, roads, and highways must contain curb ramps or other sloped areas at any intersection having curbs or other barriers to entry from a street level...
-
11B-406.3.2 Turning space
The slope of the turning space in all directions shall be 1:48 maximum....
-
11B-406.3.2 Turning space
The slope of the turning space in all directions shall be 1:48 maximum....
- Speakman Company Shower & Bath Collections Neo™ Collection SA-1006 Coat Hook
-
1003 Recreational Boating Facilities
Requirements for accessible routes and ramps are applied to gangways, but exceptions to criteria for maximum rise and slope, handrail extensions, and level landings are provided....
-
SIDEWALKS
Unless already provided, within three years of the effective date of this Agreement, the City of Waukegan will provide curb ramps or other sloped areas complying with the Standards or UFAS...
-
Trailhead Signs
pedestrians, the final rule requires the signs to include information on the length of the trail or trail segment; surface type; typical and minimum tread width; typical and maximum running slope...
-
1014.2.1 Transfer Access
The surface of the clear ground space is required to be firm and stable, and to slope not steeper than 1:48 in any direction....
-
1010.1.4 Floor elevation
Landings shall be level except for exterior landings, which are permitted to have a slope not to exceed 0.25 unit vertical in 12 units horizontal (2-percent slope)....
-
11B-406.5.6 Grade breaks
Surface slopes that meet at grade breaks shall be flush....