Where multiple grab bars are used, required horizontal grab bars shall be installed at the same height above the finish floor....
Search Results "Shower Clear Floor Space"
Filters
Commonly Searched Documents
-
608.3 Grab Bars
-
General: ADA Standard Section 303.1
Section 303.1 of the ADA Standards covers information in the current ADA Standards for changes in level for floor and ground surfaces.
-
Eco-Grip Flooring Video 6 of 8 Epoxy Mastic Application
Eco-Grip Flooring Epoxy Mastic Application...
-
11B-1008.4.1 Turning space
At least one turning space complying with Section 11B-304 shall be provided on the same level as play components....
-
Turning Space
Turning Space Piers and platforms must have at least one turning area, either a 60-inch turning space or T-shaped space, to allow a person using a mobility device or wheelchair to make...
-
Verify Framing
Maneuvering clearances/landings at doors. 11B-404 Distance between doors in series. 11B-404.2.6 Grab bar backing in toilet/shower...
-
Verify Framing
Maneuvering clearances/landings at doors. 11B-404 Distance between doors in series. 11B-404.2.6 Grab bar backing in toilet/shower...
-
404.3.1 Clear Width
404.3.1 Clear Width. Doorways shall provide a clear opening of 32 inches (815 mm) minimum in power-on and power-off mode....
-
810.5.3 Platform and Vehicle Floor Coordination
Advisory 810.5.3 Platform and Vehicle Floor Coordination....
-
810.5.3 Platform and Vehicle Floor Coordination
Advisory 810.5.3 Platform and Vehicle Floor Coordination....
-
11B-407.2.3.1 Floor designation
Floor designations complying with Sections 11B-703.2 and 11B-703.4.1 shall be provided on both jambs of elevator hoistway entrances....
-
610.3.1 Rectangular Seats
The rear edge of a rectangular seat shall be 2 1/2 inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall. The side...
-
11B-610.3.1 Rectangular seats
11B-610.3.1 Rectangular seats. The rear edge of a rectangular seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (381 mm) minimum and 16 inches (406 mm) maximum...
-
11B-610.3.1 Rectangular seats
The rear edge of a rectangular seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (381 mm) minimum and 16 inches (406 mm) maximum from the seat wall. The side edge...
-
SPACE
SPACE. A definable area, such as a room, toilet room, hall, assembly area, entrance, storage room, alcove, courtyard, or lobby....
-
Space
Space. A definable area, such as a room, toilet room, hall, assembly area, entrance, storage room, alcove, courtyard, or lobby....
-
American Specialties Retractable Shower Seat 170
Seat folds up into cabinet. Fabricated of 12 gauge stainless steel, exposed surfaces have a satin finish. Seat has reinforced channels. Wall sub frame furnished, with welded on...
-
Section F: Voting Area
_____________________________ Location name:______________________ F Within the Voting Area Yes No N/A Comments/Remedies F1 Are floor...
-
Trash and Recycling Receptacles [1011.2 and 1011.3]
At trash and recycling containers, a minimum of 36 by 48 inches of clear ground space positioned for a forward approach to the receptacle opening, or a minimum of 30 by 60 inches of...
-
404.3.1 Clear Width
Doorways shall provide a clear opening of 32 inches (815 mm) minimum in power-on and power-off mode....
-
PEMKO 2" to 48" Aluminum Plates No. 18/1
Cover Plate Assemblies are available for use whenever an unusual floor condition occurs....
-
Accessible Pathway & Corridor: Minimum Clear Width Required for 180-degree Turn Around Barrier
This data depicts the amount of space required by users of wheeled mobility devices to perform a 180-degree turn ("U-Turn") around an obstruction....
-
404.3.1 Clear Width
Doorways shall provide a clear opening of 32 inches (815 mm) minimum in power-on and power-off mode....
